BUILDING RANGE / Protection and decoration Kerakover Acrilex Fondo Organic mineral intermediate coat for the preparation of substrates before applying the decorative cycle, ideal for use in GreenBuilding. Product specifically for use in the Kerakoll Panelling system with European Technical Approval - ETA - under EAD 040083-00-0404. Based on water-based acrylic resins, safeguards the health of operators. Kerakover Acrilex Fondo is a high power filler to correct imperfections in the substrate and guarantee a fine, superior quality finish. Specifically intended for filling stabilized crazing and evening out absorption. Internal, external. PRODUCT OF EUROPEAN TECHNICAL ASSESSMENT • Excellent coverage of crazing • Intermediate layer between primer and paint covering PRODUCT STRENGTHS alth Care • Easy to apply with a brush or roller • Suitable for insulation panelling systems • Product in the KlimaExpert ETA system RATING SYSTEM ACCREDITED BY CERTIFICATION BODY SGS AREAS OF USE Use Intermediate base coat used as pre-treatment for: - cement-lime mortar plasters - cement-based plasters/renders - common and hydraulic lime-based plasters - gypsum-based plasters - plasterboard - prefabricated elements with cement conglomerates - cementitious and gypsum-based finishing products - common and hydraulic lime-based finishing layers - wood panels such as plywood - insulation panelling systems - KlimaExpert ETA systems For internal and external use. INSTRUCTIONS FOR USE Preparation of substrates Clean the substrates carefully using suitable equipment to remove all traces of dirt, dust or efflorescences. In the presence of mould or biodeteriorating agents, repair first with Kerakover Activ. Approximately 12 hours before the decorative cycle, apply, if necessary, the Kerakover Eco Acrilex Primer water-based primer on the surface to consolidate, even out absorption, and improve the adherence of the next decorative cycle. If an additional consolidating effect is required, approximately 24 hours before the decorative cycle apply one or more coats of Kerakover Acrilex Consolidante solvent-based stabilizing agent. In this case samples should be done in advance to verify the level of consolidation and absorption achieved. Plasters must be perfectly cured. Plaster patch layers must be left to cure completely. Remove all sections of partially deteriorated synthetic or mineral-based paint coatings and coverings that are fragmenting or separating from the substrate. On uneven surfaces apply preparatory finishing coats using special finishing products from the Rasobuild® Eco Top range and apply Kerakover Eco Acrilex Primer, suitably diluted. For the treatment of substrates other than those mentioned and for additional information on the types of intervention to be carried out, we recommend to consult Kerakoll’s Guide to decorating and preparing substrates. * ÉMISSION DANS L’AIR INTÉRIEUR Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions). Kerakover Acrilex Fondo Code: K652 2021/05 - EN

INSTRUCTIONS FOR USE Preparation Always remix Kerakover Acrilex Pittura before diluting. The product must be diluted up to 20% by volume with clean water, according to the type of support and tools being used. If it is used as a filler for static microcracks, dilute it by 5% by volume. Kerakover Acrilex Fondo base coat may be coloured by adding up to 20% with Kerakover Quarzite, Kerakover Eco Kompact Pittura to obtain a coloured base before application of Acrilex and Kompact fine plasters. Make sure you use a medium or rough coated roller. Application Applications must be done evenly using brushes...