Keradecor Prontofix
2Pages

BUILDING RANGE / Protection and Decoration Keradecor Prontofix Stabilizing primer based on pure powerful high-binding acrylic resins, ideal for use in GreenBuilding. Water-based, with low solvent content, safeguards the health of operators. Keradecor Prontofix is suitable for cortical consolidation, guaranteeing the uniform absorption and colour of the next decorative cycle. For internal use. • High consolidating power ater Based PRODUCT STRENGTHS GREENBUILDING RATING® alth Care • Excellent substrate uniforming power • Easy to apply with a brush, roller or spray Water-based formulation RATING SYSTEM ACCREDITED BY CERTIFICATION BODY SGS AREAS OF USE Use Professional, water-based, consolidant for: - new plaster that has been cured for 4 - 6 weeks - old plasters that are still well anchored to the masonry substrate - compact surface concrete structures - gypsum-based plasters - plasterboard - surfaces with partially deteriorated synthetic decorative finishes Interior walls. Do not use As a screed consolidant for laying ceramic or wood, in the presence of moisture rising. On external walls. Preparation of substrates Porous substrates with a limited level of cohesion must in any case be compact and absorbent, free from dust, oil or the presence of efflorescence, with no loose debris or flaky parts. On surfaces coated with synthetic finishes, paint or plastic coatings, remove all partially deteriorated sections that are fragmenting or separating from the substrate. The substrate must be stable, non-deformable and with no fracturing cracks. In the presence of mould, first treat with Kerakover Activ biocide. The substrate must be dry at the time of application. For the treatment of substrates other than those mentioned and for additional information on the types of intervention to be carried out, we recommend to consult Kerakoll’s Guide to decorating and preparing substrates. Preparation Keradecor Prontofix is ready-to-use. Always remix the product before application. Application When applying the product preferably use a short bristle, synthetic fibre roller or a brush. Apply one or more coats avoiding drips, depending on the porosity and nature of the substrate to be consolidated or evened out. Conditions required for decorating are ambient and substrate temperatures between +5 °C and +30 °C and a relative ambient humidity lower than 80%. * ÉMISSION DANS L’AIR INTÉRIEUR Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions). Keradecor Prontofix Code: K751 2021/

INSTRUCTIONS FOR USE Cleaning Keradecor Prontofix can be cleaned from tools by washing them using water before the product hardens. SPECIAL NOTES The use of Keradecor Prontofix on absorbent walls improves the adhesion of subsequent application cycles. In the case of very compact surfaces that are not very porous, avoid forming a shiny surface film. Wait 6 hours before the subsequent paint cycle, and in any event until the product has fully dried. ABSTRACT Fixing and evening up absorption of internal surfaces, by application using a brush, roller or spray of a water-based pure acrylic resin...