Geolite_1220
4Pages

BUILDING RANGE / Repair and reinforcement of reinforced concrete and masonry GeoLite® Certified, eco-friendly mineral geo-mortar with a crystalline reaction geobinder base, for passivation, restoration, finishing and monolithic protection of deteriorated concrete structures, ideal for use in GreenBuilding. Very low petrochemical polymer content, free from organic fibres. Thixotropic, normal setting. GeoLite ® is a thixotropic geo-mortar used to passivate, restore, finish and protect reinforced concrete structures such as beams, pillars, slabs, front sections, ramps, facades, decorative elements, cornices and civil engineering structures such as bridges, viaducts, tunnels and water channels. Suitable for use an inorganic mineral matrix to be used with GeoSteel galvanized steel sheets in certified structural reinforcement, improvement and seismic adaptation systems. EUROPEAN TECHNICAL ASSESSMENT CARBONATION RESISTANCE STRENGTHENING SYSTEM RECOGNIZED by Certified in combination with GeoSteel G600 and G1200 for concrete structures GREENBUILDING RATING® PRODUCT STRENGTHS GeoLite® -- Category: Inorganic mineral products -- Repair and reinforcement of reinforced concrete and masonry • GEO-BINDER. Exclusive use of the innovative Kerakoll geo-binder revolutionises mortars used to repair concrete, guaranteeing levels of safety never before achieved and unique eco-friendly performance. • MONOLITHIC. The first geo-mortar that forms a monolithic conglomerate that will surround, protect and strengthen reinforced concrete works without the need to apply several layers. The only mortar that is certified to passivate, restore, finish, correct and protect in a single layer. • CRYSTALLISING. The naturally stable, monolithic repairs carried out with GeoLite® crystallise with the concrete to guarantee the durability of a mineral rock. • QUICK. The first geo-mortar that requires just one day’s work to achieve complete restoration, as compared with the six days required by traditional restoration mortar cycles involving several layers. • TAILORED. The first range of geo-mortars with different setting times (> 80 – 40 – 10 min.) that can be mixed together to customise setting times according to conditions on the building site. Can be recycled as inert material RATING SYSTEM ACCREDITED BY CERTIFICATION BODY SGS ECO NOTES -- Based on geo-binder -- Eco-friendly concrete restoration -- Very low petrochemical polymer content -- Free from organic fibres -- With low CO2 emissions -- With very low volatile organic compound emissions -- Can be recycled as mineral inert material, avoiding waste disposal costs and environmental impact Use Passivation, localised and generalised restoration; finishing and monolithic protection of reinforced concrete structures, such as beams, pillars, slabs, front sections, ramps, exposed walls, decorative elements, cornices and civil engineering structures such as bridges, viaducts, tunnels, water channels. Specific for medium or large size operations, machine application, finishing of large surface areas. Suitable as an inorganic mineral matrix in certified composite reinforcement systems from the GeoSteel range, for the static and seismic adaptation or improvement of reinforced concrete structural elements. Ideal for GreenBuilding and Restoration of Modern Architecture. INSTRUCTIONS FOR USE Preparation of substrates Before applying GeoLite® restore the concrete surface and roughen it to a depth of at least 5 mm, equal to level 8 of the Test Kit for preparation of reinforced concrete and masonry substrates, by mechanical scarification or hydro-demolition, thoroughly removing all * ÉMISSION DANS L’AIR INTÉRIEUR Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions).

INSTRUCTIONS FOR USE weakened concrete; after this all rust must be removed from the reinforcing bars, which must be cleaned by polishing (manual or mechanical) or sandblasting. Then proceed with cleaning of the treated surface using compressed air or high-pressure washer, and soak thoroughly to saturate the substrate, but with no liquid water on the surface. As an alternative to wetting with water, on horizontal concrete surfaces, application of Geolite® Base guarantees proper absorption on dry substrates and encourages natural crystallisation of the geo-mortar. Before applying GeoLite®,...

ABSTRACT Passivation, localised and generalised centimetre-thick monolithic restoration of deteriorated concrete structural elements and civil engineering structures, millimetre-thick monolithic protective finishing with manual or machine application of certified, thixotropic, eco-friendly, normal setting geo-mortar with a crystalline reaction zirconia and geo-binder base, extremely low petrochemical polymer content and free from organic fibres, specific for the passivation, restoration, finishing and guaranteed, long-lasting, monolithic protection of concrete structures, such as GeoLite®...

PERFORMANCE Performance characteristic Permeability to water vapour Capillary absorption and water permeability Bond strength by pull off Test Method GeoLite® Performance Reference class Thermal expansion coefficient value exceeded Reference class Linear shrinkage Adhesion following thermal shock Resistance to impact Hazardous substances Aggregate performance characteristic Alkali-aggregates reaction compliant with point 5.4 Test Method GeoLite® aggregate performance reactivity class VOC INDOOR AIR QUALITY (IAQ) - VOLATILE ORGANIC COMPOUND EMISSIONS Conformity EC 1 plus GEV-Emicode -...