Biocalce® Silicato Consolidante
3Pages

{{requestButtons}}

Catalog excerpts

Biocalce®  Silicato Consolidante - 1

BUILDING RANGE / Mortars, plasters/renders and natural decoration Biocalce® Silicato Consolidante Natural, eco-friendly, breathable, stabilizing cortical consolidant based on pure stabilized potassium silicate, solvent-free, ideal for use in GreenBuilding and Historical Restoration. Contains raw materials of only natural origin. Provides natural ventilation to improve indoor air quality. Safeguards the health of both operators and the environment. Biocalce ® Silicato Consolidante is specifically intended for consolidating and evening out absorption of mineral substrates before applying decorative silicate cycles; also suitable for consolidating plasters and renders that are anchored to the underlying masonry, not covered with synthetic finishings. Naturally protected with pine oil in accordance with DIN 18363. ORGANIC CONTENT EUROPEAN COMMISSION TEST METHOD INDOOR AIR QUALITY NATURAL BACTERIOSTATIC GREENBUILDING RATING® PRODUCT STRENGTHS Biocalce® Silicato Consolidante -- Category: Inorganic Natural Fluids -- Mortars, plasters/renders and natural decoration • Naturally breathable, allows walls to breath • Acts to promote silication • Does not alter the finish of the surfaces ater Based Water-based formulation alth Care • Suitable for diluting Biocalce ® Silicato Puro Pittura tion Redu • High smoothness, easy-to-apply No environmental hazard rating NATURAL INGREDIENTS Pure potassium silicate Pine oil With less than 5% added organic emulsion, as required under DIN 18363 Use Biocalce® Silicato Consolidante is suitable to consolidate cured new lime or hydraulic cement-lime based plasters/renders, and old plasters/renders that are well anchored to the masonry substrate, not coated with synthetic finishes . Biocalce® Silicato Consolidante is suitable for diluting Biocalce® Silicato Puro Pittura. Biocalce® Silicato Consolidante is particularly well suited to achieve decorations of high aesthetic quality in Edilizia del Benessere® (Building for Wellness) in which the all-natural ingredients guarantee compliance with the required levels of breathability and permeability to water vapour. Biocalce® Silicato Consolidante is suitable for decoration in Historical Restoration projects, where the choice of traditional materials such as pure potassium silicate guarantees conservation interventions in full respect of the existing structures and original materials. Do not use On synthetic paints and plastic coverings. On gypsum-based surfaces and plasters. On walls subject to capillary moisture rising without prior application of dehumidifying plasters/renders. INSTRUCTIONS FOR USE Preparation of substrates The substrate must be clean with appropriate means to make it free from loose debris, dust and mould. New plaster/render patch layers must be left to cure. * ÉMISSION DANS L’AIR INTÉRIEUR Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions). Biocalce® Silicato Consolidante C

Open the catalog to page 1
Biocalce®  Silicato Consolidante - 2

INSTRUCTIONS FOR USE On surfaces coated with paint or partially deteriorated decorative coatings, remove all loose debris and particles unbonded to the substrate. The substrate must be dry at the time of application. For the treatment of substrates other than those mentioned and for additional information on the types of intervention to be carried out, we recommend to consult Kerakoll’s Guide to decorating and preparing substrates. Preparation Mix carefully before use. Application Consolidation: apply one or more coats using a brush, taking care to apply the consolidating agent in an...

Open the catalog to page 2
Biocalce®  Silicato Consolidante - 3

PERFORMANCE ACTIVE INDOOR AIR QUALITY (IAQ) - DILUTION OF INDOOR POLLUTANTS * Flow Dilution Toluene 247 µg m2/h +65% method JRC Pinene 297 µg m2/h +107% method JRC Formaldehyde 4785 µg m2/h +53% method JRC Carbon dioxide (CO2) 305 mg m2/h +335% method JRC Humidity (Humid Air) 42 mg m2/h +95% method JRC Values taken at +20 ± 2 °C, 65 ± 5% R.H. and no ventilation. Data may vary depending on specific conditions at the building site. * carried out according to JRC method - Joint Research Centre - European Commission, Ispra (Varese, Italy) - to measure the reduction of polluting substances in...

Open the catalog to page 3

All KERAKOLL catalogs and technical brochures

  1. Geolite_1220

    4 Pages

  2. Tapetex Plus

    1 Pages

  3. Bioscud

    6 Pages

  4. GeoLite®

    20 Pages