Biocalce® Intonachino Fino
3Pages

BUILDING RANGE / Mortars, plasters/renders and natural decoration Biocalce® Intonachino Fino Certified, eco-friendly, natural finishing coat containing pure NHL 3.5, EN 4591 compliant lime for highly breathable fine-grain finishing of plasters/renders, ideal for use in GreenBuilding and Historical Restoration. Contains raw materials of only natural origin, with low CO2 emissions and very low volatile organic compound emissions. Provides natural ventilation to improve indoor air quality, natural bacteriostatic and fungistatic effect. Recyclable as an inert material at the end of its life. Biocalce ® Intonachino Fino is a breathable finish coat for the fine-grain surface finishing of conventional plaster/render coats and in Biocalce ® restoration cycles. EUROPEAN COMMISSION TEST METHOD NATURAL HYDRAULIC LIME NATURAL BACTERIOSTATIC PRODUCT STRENGTHS Biocalce® Intonachino Fino -- Category: Inorganic natural minerals -- Mortars, plasters/renders and natural decoration • Natural, porous and highly breathable, allows walls to breath No development of bacteria or fungi • Natural bacteriostatic and fungistatic classified B+ e F+ (CSTB method)** GREENBUILDING RATING® • Internal, external • Soft, lightweight mixture for fast spreading • Long workability and excellent finishing coat NATURAL INGREDIENTS Pure NHL 3.5 Certified Natural Lime Siliceous Washed Natural River Sand (0.1-0.5 mm) Pure Fine White Carrara Marble (0-0.2 mm) Pure Fine White Carrara Marble (0-0.5 mm) Use Breathable finishing product (grain size 0 – 0.5 mm) for conventional and Biocalce® restoration plaster coats, for internal and external use. Biocalce® Intonachino Fino is particularly good for the fine-grain finishing of plastered masonry surfaces in Edilizia del Benessere® (Building for Wellness) in which the all-natural ingredients guarantee compliance with the required levels of porosity, hygroscopicity and breathability. Biocalce® Intonachino Fino is suitable for natural, breathable finishing coats in Historical Restoration, where the choice of traditional materials such as natural lime, stone, marble and granite, mixed in carefully-studied proportions, guarantees conservative interventions in full respect of the existing structures and original materials. Do not use On substrates which are dirty, non-cohesive, powdery. On previous paint coats or lime putty coverings. On substrates with a lot of interstitial salt deposits. Do not apply directly on gypsum-based plasters/renders: eco-friendly Rasobuild® Eco Consolidante surface insulation must be applied first. INSTRUCTIONS FOR USE Preparation of substrates The substrate must be clean and solid, free from loose debris, dust and mould. Old plasters must be dry, in good condition, compact and cleaned carefully to remove any remaining traces of previous processes (lime putty coverings, old finishing coats, etc.). Scratch off the surfaces of new plaster coats with a metal scraper to remove the surface cement slurry, to make it easier to then lay the finish layer without air bubbles forming. Before finishing, always wet substrates. * ÉMISSION DANS L’AIR INTÉRIEUR Information sur le niveau d’émission de substances volatiles dans l’air intérieur, présentant un risque de toxicité par inhalation, sur une échelle de classe allant de A+ (très faibles émissions) à C (fortes émissions). ** Tests carried out according to CSTB method, bacterial and fungal contamination

INSTRUCTIONS FOR USE Preparation To prepare Biocalce® Intonachino Fino, mix one 25 kg bag with about 5.6 l of clean water. The mixture is obtained by pouring water into the container and then gradually adding the powder. The mixing process can be performed in a cement mixer, in a bucket (working manually or with a low-rev, mechanical stirring device) or using a continuous mixer until a smooth and lump-free mortar is obtained. Use all of prepared mixture; do not reuse it in subsequent mixings. Store the product in places protected against the heat in summer months and against the cold during...

PERFORMANCE VOC INDOOR AIR QUALITY (IAQ) - VOLATILE ORGANIC COMPOUND EMISSIONS Conformity EC 1 plus GEV-Emicode ACTIVE INDOOR AIR QUALITY (IAQ) - DILUTION OF INDOOR POLLUTANTS * Flow Dilution Toluene 319 µg m2/h +5% Pinene 448 µg m2/h +13% Formaldehyde 7699 µg m2/h +4% Carbon dioxide (CO2) 558 mg m2/h test failed Humidity (Humid Air) 86 mg m2/h +21% BIOACTIVE INDOOR AIR QUALITY (IAQ) - BACTERIOSTATIC ACTION ** Enterococcus faecalis Class B+ no proliferation CSTB method BIOACTIVE INDOOR AIR QUALITY (IAQ) - FUNGISTATIC ACTION ** Penicillum brevicompactum Class F+ no proliferation CSTB method...