Kent Tactile Warning Stud Multi Groove

Product catalog summary

Product Overview:
Kent Tactile Warning Studs (Multi Groove) are designed to provide an underfoot warning to identify hazards and dangerous areas, such as changes in levels or unprotected openings like open stairwells and platforms. These studs are made from Grade 316L stainless steel with a satin finish, making them suitable for high-traffic pedestrian areas due to their slip-resistant design.

Specifications:

Material: Grade 316L Stainless Steel
Finish: Satin, 320 Grit Polished
Design: Flat Domed & Multi Grooved

Features:

Provides underfoot warning for hazard identification
Easy installation
Slip-resistant design

Installation Procedure:

Drill a 0.59” (15mm) diameter hole 1.18” (30mm) deep.
Clean out the drilled hole.
Fill with chemical mortar (recommended: MIT-SE Mortar).
Insert stud and allow to set for 24 hours.

Maintenance Guidelines:
The studs require maintenance to retain their bright appearance, especially in coastal areas. Clean using warm water with mild detergent and a non-abrasive cloth. For heavier stains, use a nylon-scouring pad or stainless steel cleaner. Rust spots can be treated with Rust Remover 410, and severe stains may require Oxalic Acid solution. Stainless steel polishes can enhance the surface finish.

Contact Information:
Kent Stainless Ltd, Ardcavan, Wexford, Ireland
Tel: +353 53 9143216
UK Freephone: 0800 376 8377
Fax: +353 53 9141802
Web: www.kentstainless.com
Email: [email protected]

Catalog excerpts

Kent Tactile Warning Stud ( Multi Groove)

Open the catalog to page 1

KENT STAINLESS: STREET FURNITURE KENT TACTILE WARNING STUD (MULTI GROOVE) KTWS 35/5/FDMG Features: • Grade 316 Stainless steel identify hazards and dangerous areas. • Easy Installation • Slip resistant design Specify: Kent Tactile Warning Studs (Flat Domed & Mult Grooved) KTWS/35/5/FDMG; Grade 316L Stainless Steel; Satin Finish 320 Grit Polished. The Kent Tactile Warning Studs provide an underfoot warning to identify hazards and dangerous areas where there is a change in levels or where there is an unprotected opening such as open stairwells and platforms. The stainless steel material is ideal...

Open the catalog to page 2

Kent Tactile Warning Stud Multi Groove-3

KENT STAINLESS: STREET FURNITURE KENT TACTILE WARNING STUD ( MULTI GROOVE )KTWD 35/5FDMG

Open the catalog to page 3

Kent Tactile Warning Stud Multi Groove-4

KENT STAINLESS: STREET FURNITURE 3 KENT TACTILE WARNING STUD ( MULTI GROOVE ) KTWS 35/5 FDMG Step 1: Drill a 0.59” (15mm) Diameter hole 1.18” (30mm) deep. Step 2: Clean out the drilled hole. Step 3: Fill with chemical mortar (Kent Stainless recommend MIT-SE Mortar). Step 4: Insert Stud and leave to set for 24 hours

Open the catalog to page 4

Kent Tactile Warning Stud Multi Groove-5

KENT STAINLESS: STREET FURNITURE 5 KENT TACTILE WARNING STUD ( MULTI GROOVE ) KTWS 35/5 FDMG Maintenance of Stainless Steel The Kent tactile warning is constructed from 316L grade stainless steel .The external finish of the stud is Satin finish in a circular pattern. Despite the material’s corrosion resistant properties some care is required to maintain a bright appearance. The conditions that the studs are in (Inland or Coastal area), will greatly increase its need for cleaning and care. Clean the stainless steel components using warm water with a mild detergent with a non-abrasive cloth or...

Open the catalog to page 5