Catalogs >
Kent Stainless >
KENT T6 Telescopic Unit

KENT T6 Telescopic Unit
1Pages

Catalog excerpts

KENT STAINLESS IN GROUND UNITS KENT STAINLESS IN GROUND UNITS KENT T6 Telescopic Unit KENT T6 Telescopic Unit The Kent T6 Telescopic in Ground Power Unit is ideal Suitable for arenas, areas hosting large events, and areas where temporary power may be required. This model has a 600mm x 600mm recessed cover for stone infill. The unit can be opened by the using a turn handle or cordless drill on the adaptor in the centre of the tray. This unit can hold up to a maximum combination of up to 8nr IP67 rated electrical sockets (maximum 192 amps) and 8nr IP67 data points. The unit also contains a housing for an IP68rated Junction box and has a 110mm diameter drainage outlet to prevent water sitting in the base of the unit. The covers are manufactured in accordance with FACTA and BS EN124 standards. The covers are suitable for 60mm deep paving blocks and are manufactured to meet required loadings. They are fabricated in grade 316 stainless steel as standard. Features q Up to 12nr IP67 rated sockets (Max 192amps) q 110mm diameter drainage outlet q Recessed cover for stone infill q Raised by turning handle/cordless drill SCREW RISER - OPEN WITH DRILL BIT OR MANUAL TURN Use this box for multiple operators, where use in the open position is acceptable - eg on campus. TWIN SKIN: HOLLOW WALL TO BE FILLED ON SITE WITH CONCRETE BY CONTRACTOR PAVIOUR DIRECTLY ADJACENT TO FRAME TO BEDDED USING AN EPOXY MORTAR OR POLYMER MODIFIED MORTAR Product Code Visible Frame Size Unit Depth MINIMUM CONCRETE SURROUNDS C35/45 IP67 JUNCTION BOX TO BE RESIN FILLED VY ELECTRICAL CONTRACTOR Specify Kent IGU– Telescopic Unit; 600mm x 600mm top; with a 1205mm depth; Grade 316 Stainless Steel; 8nr 32 Amp 1 Phase plus 8nr RJ45 Data N.B ENSURE CONNECTION TO DRAINAGE SYSTEM UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR 0 - 10 = 0.25mm 10 - 200 = 0.50mm 200 - 1000 = 1.00mm 1000 - Upwards = 2.00mm ANGULAR = 0.50 DEBUR AND BREAK ALL SHARP EDGES PROJECT: ALL DIMENSIONS TO OUTSIDE EDGES UNLESS STATED OTHERWISE Third Angle Projection FINISH: NAME DRAWN CHK'D APPV'D SIZE / THICKNESS:

Open the catalog to page 1

KENT T6 Telescopic Unit 1Pages

Catalog excerpts

All Kent Stainless catalogs and technical brochures

KENT T6 Telescopic Unit
1Pages