Kent Ridge Tactile Warning Strip

Product catalog summary

Product Specification:
Kent Ridge Tactile Warning Strip (KRTWS-25/400) is a 400mm long strip made from Grade 316L Stainless Steel with a satin finish. It is designed to provide an underfoot warning in areas with potential hazards such as changes in levels or unprotected openings.

Features:

Made from durable Grade 316L Stainless Steel.
Slip-resistant ridge finish for safety.
Easy installation with chemically cemented bolts.

Dimensions:

Length: 400mm
Width: 25mm
Height above ground level: 5mm

Installation:
The strip is fixed using three 15mm high x 6mm wide bolts, spaced at 150mm centers.

Maintenance:
Stainless steel components should be cleaned with warm water and mild detergent. For heavier stains, a nylon scouring pad or stainless steel cleaner may be used. Rust spots can be treated with Rust Remover 410.

Regulations & Guidelines:
According to DDA regulations, strips should be placed at 50mm centers across pedestrian travel direction. The standard strip size is 400mm x 25mm, with a 15mm gap between strips.

Testimonials:

Parsons praised the engineering and design advice.
Skanska was pleased with the quality of work.
Wexford County Council appreciated the engineering know-how and design flexibility.

Contact Information:
Kent Stainless Ltd, Ardcavan, Wexford, Ireland. Phone: +353 53 9143216, UK Freephone: 0800 376 8377, Email: [email protected]

Catalog excerpts

Kent Ridge Tactile Warning Strip

Open the catalog to page 1

KENT STAINLESS: STRIP —o KENT RIDGE TACTILE WARNING STRIP - KRTWS-25/400 Kent Features: • Underfoot warning to identify hazards and dangerous areas • Grade 316L Stainless Steel • Easy installation • Slip resistant ridge finish de Specify Kent Ridge Tactile Warning Strip KRTWS-25/400; Description Kent Ridge Tactile Warning Strip KRTWS-25/400; 400mm length; Grade 316L Stainless Steel Kent Ridge Tactile Warning Strips Grade 316L Stainless Steel; Satin Finish 320 Grit Polished. The Kent Ridge Tactile Warning Strips provide an underfoot warning to identify hazards and dangerous areas where is a change...

Open the catalog to page 2

KENT STAINLESS: STRIP KENT RIDGE TACTILE WARNING STRIP - KRTWS 25/400 Product Code Fixing method : There are three 15mm high x 6mm wide Bolts which are chemically cemented into the ground. The fixing points are spaced at 150mm centres.

Open the catalog to page 3

3 KENT STAINLESS: STRIP KENT RIDGE TACTILE WARNING STRIP - KRTWS 25/400 Stainless Steel Maintenance Clean the stainless steel components using warm water with a mild detergent with a non abrasive cloth or sponge. Heavier stains may require the use of a nylon scouring pad or a stainless steel cleaner. To remove paint or graffiti (or light concrete splashes) use a cloth and alkaline or solvent paint strippers according to type of paint. For Satin Finish Stainless try to follow the direction of the grain when cleaning vigorously or polishing. For Bead Blasted Finish use a circular motion. Rust spots...

Open the catalog to page 4

KENT STAINLESS: STRIP 4 KENT RIDGE TACTILE WARNING STRIP - KRTWS 25/400 Regulations & Guidelines: In DDA regulations it specifies that Strips are to placed at 50mm centres running transversely across the direction of pedestrian travel. The bars are 6mm - 5mm high, 20mm - 25mm wide and spaced 50mm from the centre of one bar to the centre of the next bar. (As Shown in the Diagram below) Our standard Kent Tactile Warning Stud is 400 mm x 25mm. This means we must leave a 15 mm gap from end to end of each Strip. For more information on the regulations on this Follow the link below: https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/289245/tactilepaving-surfaces.pdf...

Open the catalog to page 5

5 KENT STAINLESS: STRIP KENT RIDGE TACTILE WARNING STRIP - KRTWS 25/400 Testimonials “ The In-house engineering completed by Kent Stainless and the Knowledge and advice given to finalise the design was outstanding” - Parsons “ The client and the main contractor both were delighted with the quality of the work supplied by Kent Stainless” - Skanska “ Because of the engineering know-how you provided and flexibility in design, we will certainly return to Kent's for further work ” - Wexford County Council

Open the catalog to page 6