Kent Demarcation Stud

Product catalog summary

Product Overview:
Kent Demarcation Stud (KDS 25) is a street furniture product designed to delineate walkways and site boundaries. It is made from Grade 316L Stainless Steel, suitable for high-traffic pedestrian areas, with a polished finish. The stud has a diameter of 25mm and a height of 4mm.

Specifications:

Material: Grade 316 Stainless Steel
Dimensions: Diameter 0.98” (25mm), Height 0.15” (4mm)
Finish: Polished
Installation: 1 installation pin

Product Variants:

KDS 25: 0.98in (25mm) diameter
KDS 50: 1.96in (50mm) diameter
KDS 75: 2.95in (75mm) diameter
KDS 100: 3.93in (100mm) diameter

Installation Procedure:

Drill a 0.39” (10mm) diameter hole, 1.18” (30mm) deep.
Clean the drilled hole.
Fill with chemical mortar (recommended: MIT-SE Mortar).
Insert the stud and allow it to set for 24 hours.

Maintenance Guidelines:

Clean with warm water and mild detergent using a non-abrasive cloth.
For heavier stains, use a nylon-scouring pad or stainless steel cleaner.
Remove paint or graffiti with alkaline or solvent paint strippers.
For rust spots, use Rust Remover 410.
Severely stained surfaces can be restored with Oxalic Acid solution.

Contact Information:
Kent Stainless Ltd, Ardcavan, Wexford, Ireland
Tel: +353 53 9143216
UK Freephone: 0800 376 8377
Fax: +353 53 9141802
Web: www.kentstainless.com
Email: [email protected]

Catalog excerpts

Kent Demarcation Stud

Open the catalog to page 1

KENT STAINLESS: STREET FURNITURE Specify: Kent Demarcation Stud (KDS 25); Grade 316 Stainless Steel; Dia: 0.98" (25mm), Height: 0.15" (4mm); 1nr 0.23" (6mm) dia x 0.78" (20mm) high studs, Polished Finish; Description: Kent Demarcation Stud is used to de-lineate walkways and site boundaries. The disc lies 0.19" (5mm) above the surface once installed. It is manufactured using Grade 316L Stainless Steel, this material is perfect for high-traffic pedestrian areas. It has an overall diameter of 25mm Features: • Grade 316 Stainless steel • Polished Finish

Open the catalog to page 2

KENT STAINLESS: STREET FURNITURE 2 KENT CRISS CROSS DEMARCATION STUD (KCCDS 25) Product Code Kent Demarcation Stud KDS 25 * Kent Demarcation Stud KDS 50 * Kent Demarcation Stud KDS 75 * Kent Demarcation Stud KDS 100

Open the catalog to page 3

KENT STAINLESS: STREET FURNITURE 3 KENT CRISS CROSS DEMARCATION STUD (KCCDS 25) Step 1: Drill x1, 0.39” (10mm) Diameter hole 1.18” (30mm) deep. Step 2: Clean out the drilled hole. Step 3: Fill with chemical mortar (Kent Stainless recommend MIT-SE Mortar). Step 4: Insert the Kent Criss Cross Demarcation Stud and leave to set for 24 hours

Open the catalog to page 4

KENT STAINLESS: STREET FURNITURE 4 KENT DEMARCATION STUD (KDS 25) Specify Choose your steel: Grade 304 Stainless steel Grade 316 Stainless steel Specify: Kent Criss Cross Demarcation Stud (KCCDS 25); Grade 316 Stainless Steel; Dia: 0.98” (25mm), Height: 0.15” (4mm); 1nr 0.23” (6mm) dia x 0.78” (20mm) high studs, Polished Finish; Choose your Size: Standard 25mm dia Bespoke versions: 50, 75 & 100mm dia

Open the catalog to page 5

KENT STAINLESS: STREET FURNITURE 5 KENT DEMARCATION STUD (KDS 25) Maintenance of Stainless Steel Clean the stainless steel components using warm water with a mild detergent with a nonabrasive cloth or sponge. Heavier stains may require the use of a nylon-scouring pad or a stainless steel cleaner. To remove paint or graffiti use a cloth and Alkaline or solvent paint strippers according to type of paint. In the case of a bead blasted finish, where abrasive cleaning is required, always use a random circular rubbing action with a cloth. In the case of brushed finishes the surface consists of uniform...

Open the catalog to page 6