PLUS PRODUCT WINDING FABRIC instead of a bundle, it takes up minimum space when the curtain is closed MODULAR SYSTEM infinite number of modules can be installed side by side CLEAN DESIGN without fringe and fabric support profiles

XTESA PLAIN Modular shade pergola awning with wrap-around fabric. Pillars and gutter can be set back towards the wall by 215 cm to ensure the minimum necessary sealing conditions. The maximum dimensions allowed are 500x400/400x700 with 300 cm. high pillars. 20/28 mq coverage area for single module. The profiles are made of EN AW-6060 extruded aluminium alloy (with 11 x 11 cm guides and 9.5 x 13 cm columns). Each module is motorised separately. If the structure its overhang is wider than 4 mt., it will be equipped with a stabilizer bar. Fitted with a stabiliser bar that projects over 4 metres....

TECHNICAL INFORMATION General technical plan Technical scheme of column setback Guides interaxis width Interasse guide Roller tube

TECHNICAL INFORMATION Girder section Standard glass door beam Reinforced glass beam Hood section Ground connection Wall fixing

TECHNICAL INFORMATION Wall installation System for water drainage Gasket between multiple modules

Standard Added module P = Minimum slope for correct drainage

The wind resistance of an exterior shade system is characterized by its ability to support defined loads by simulating wind with positive or negative pressure. In order to define a correlation between the wind resistance class according to the classes defined by the technical standard EN 13561 and the wind speed expressed in Km / h, a comparative table with the Beaufort scale is used. The Beaufort Scale classifies winds according to the speed at which they blow. Wind speed is measured in kilometers per hour (km / h) or in nodes using a measuring instrument, called anemometer, at a height of about...

The KE painting process includes high quality standards, with an 8-stage pre-treatment that includes degreasing, deoxidation, and protective treatments before painting. Thanks to this last phase, components and profiles are further guaranteed against particularly severe environmental situations. At the end of the process the profiles and components are painted with polyester resin-based epoxy powders. Treated components are periodically tested in salt spray according to the ISO 9227 standard to confirm conformity and constistency of the process. The European product standard EN 13561: 2015 defines...

When working with color, we know that our whole world is defined by light. And color is nothing more than a breakdown of light. Objects reflect back to our eyes only the color that defines it. This is why it is so important to recognize the close link between color and matter. For this project, there are three keywords that guide the research: Words, Places, Matters. WORDS: Naming colors is important to make them familiar and easily recognizable. PLACES: Places define colors. Recognizing different types of places is a starting point for defining and suggesting color combinations. MATERIALS: Objects...

N.B. For colors not listed, KE reserves the right to select the best possible color combination between the frame and the available plastic components.

There is increasing demand for high-performance buildings that have a very low energy consumption and use energy derived from renewable sources. In particular, the limitation of solar heat gain is one of the most important aspects of summer thermal comfort. Solar shading plays an essential role in this concept. The gtot value determines the ability of the solar shield to maintain, in an environment directly exposed to solar radiation, a more comfortable temperature than that which would occur with the presence of glass alone. The solar heat gains are directly proportional to the total transmittance...

OPTIONAL_LINE GLASS Sliding windows with frameless doors. Lower track only 18 mm high. Easy installation with left or right hand opening. Side or central closure. Packaging with aligned windows. Height adjustment up to 8 mm for each single door. Removable for easy cleaning. Closure with self-locking and / or lock. Waterproofing is not guaranteed during heavy rain or rain with wind. Technical Details

Vertika is a vertical closure that provides protection from sun and rain. It can be equipped with WIND BLOCK, a locking tensioning system for the fabric. With Vertika you can use blackout and filtering fabrics to better manage solar radiation. • Technical Details WIND BLOCK: Front bar Interlock device to be used on 100 and 130 Screeny GPZ guide, GPZ I and Gpz Unica. In wind, front bar stays locked in the low position and fabric is steadily tightened when the awning is opened completely.

Rear view

Rear view

VERTIKA_HIDE 110 GPZ H2F Ceiling installation A-A vista posteriore - rear view L vista dall’alto - top view 44 28 38 guida a parete - wall guide B-B guida a nicchia - niche guide B-B 45

Rear view VERSIONE GPZ I Niche guide B-B

OPTIONAL SIDE CLOSURES _ DOORS AND CURTAINS The doors have been designed to provide protection from water and wind. They are made from extruded aluminum alloy profiles (EN-AW 6060-T6) and 4 + 4 pvd 0.76 safety and shatterproof laminated glass in accordance with UNI 7697 2014. Doors are available in either one or two door versions. The interior of the structure can be enhanced with decorative curtains. That extra romantic touch which will surely be appreciated by anyone looking for a little privacy or who want “a room all to themselves”

Thermal comfort blends perfectly with beautiful style thanks to the more than 500 high performance fabrics available. A wide variety of colors, styles and solar shading factors allow for a system that meets your specific needs. All fabrics are CE Certified according to the EN 13561 and EN 14501 technical standards. N.B. See the Fabric Guide for further fabric specifications. PRECONTRAINT 302 SOLTIS PROOF W96 IRISUN BLOCKOUT PRECONTRAINT 302 SOLTIS PROOF W96 IRISUN BLOCKOUT SOLTIS PROOF W96 IRISUN BLOCKOUT