Catalogs >
KE Outdoor Design >
KEDRY PLUS

KEDRY PLUS
1 / 27Pages

Catalog excerpts

KEDRY PLUS Freestanding aluminium shade structure with a roof of adjustable blades consisting of a perimeter gutter profile that allows the blades to rotate and the water to drain away. Movement is provided by linear motors. Certified wind resistance up to class 6 according to EN 13561. Over 6 meters thick, the structure will be equipped with a stabilizing box. OPTIONAL VERTIKA GLASS DOORS

Open the catalog to page 3

General technical plan Girder section Louvre blade profile Louvre blade profile Ground connection

Open the catalog to page 4

TECHNICAL INFORMATION Ground connection Foot kit with corrugated

Open the catalog to page 5

WIND RESISTANCE The wind resistance of an exterior shade system is characterized by its ability to support defined loads by simulating wind with positive or negative pressure. In order to define a correlation between the wind resistance class according to the classes defined by the technical standard EN 13561 and the wind speed expressed in Km / h, a comparative table with the Beaufort scale is used. The Beaufort Scale classifies winds according to the speed at which they blow. Wind speed is measured in kilometers per hour (km / h) or in nodes using a measuring instrument, called...

Open the catalog to page 6

WIND CERTIFICATION

Open the catalog to page 7

Although the product is designed and intended for use as solar shading, it can also be used in the rain *. * Resistance to rainwater can be compromised and therefore cannot be guaranteed in the event of especially adverse weather conditions such as heavy rain or rain accompanied by wind. The water drainage systems must always be properly maintained and kept free from obstructions. The formation of condensation on the fabric is a natural phenomenon not to be considered a defect.

Open the catalog to page 8

The KE painting process includes high quality standards, with an 8-stage pre-treatment that includes degreasing, deoxidation, and protective treatments before painting. Thanks to this last phase, components and profiles are further guaranteed against particularly severe environmental situations. At the end of the process the profiles and components are painted with polyester resin-based epoxy powders. Treated components are periodically tested in salt spray according to the ISO 9227 standard to confirm conformity and constistency of the process. The European product standard EN 13561: 2015...

Open the catalog to page 9

When working with color, we know that our whole world is defined by light. And color is nothing more than a breakdown of light. Objects reflect back to our eyes only the color that defines it. This is why it is so important to recognize the close link between color and matter. For this project, there are three keywords that guide the research: Words, Places, Matters. WORDS: Naming colors is important to make them familiar and easily recognizable. PLACES: Places define colors. Recognizing different types of places is a starting point for defining and suggesting color combinations. MATERIALS:...

Open the catalog to page 10

There is increasing demand for high-performance buildings that have a very low energy consumption and use energy derived from renewable sources. In particular, the limitation of solar heat gain is one of the most important aspects of summer thermal comfort. Solar shading plays an essential role in this concept. The gtot value determines the ability of the solar shield to maintain, in an environment directly exposed to solar radiation, a more comfortable temperature than that which would occur with the presence of glass alone. The solar heat gains are directly proportional to the total...

Open the catalog to page 11

OPTIONAL_LINE GLASS Sliding windows with frameless doors. Lower track only 18 mm high. Easy installation with left or right hand opening. Side or central closure. Packaging with aligned windows. Height adjustment up to 8 mm for each single door. Removable for easy cleaning. Closure with self-locking and / or lock Waterproofing is not guaranteed during heavy rain or rain with wind. Technical Details

Open the catalog to page 12

Vertika is a vertical closure that provides protection from sun and rain. It can be equipped with WIND BLOCK, a locking tensioning system for the fabric. With Vertika you can use blackout and filtering fabrics to better manage solar radiation. • Technical Details WIND BLOCK: Front bar Interlock device to be used on 100 and 130 Screeny GPZ guide, GPZ I and Gpz Unica. In wind, front bar stays locked in the low position and fabric is steadily tightened when the awning is opened completely.

Open the catalog to page 13

Rear view

Open the catalog to page 15

VERSION GPZ C Niche guide B-B VERSION GPZ I Niche guide B-B

Open the catalog to page 16

VERSION GPZ I Niche guide B-B

Open the catalog to page 18

OPTIONAL SIDE CLOSURES _ DOORS AND CURTAINS The doors have been designed to provide protection from water and wind. They are made from extruded aluminum alloy profiles (EN-AW 6060-T6) and 4 + 4 pvd 0.76 safety and shatterproof laminated glass in accordance with UNI 7697 2014. Doors are available in either one or two door versions. The interior of the structure can be enhanced with decorative curtains. That extra romantic touch which will surely be appreciated by anyone looking for a little privacy or who want “a room all to themselves”

Open the catalog to page 19

Thermal comfort blends perfectly with beautiful style thanks to the more than 500 high performance fabrics available. A wide variety of colors, styles and solar shading factors allow for a system that meets your specific needs. All fabrics are CE Certified according to the EN 13561 and EN 14501 technical standards. See the Fabric Guide for further fabric specifications. STAR SCREEN IRISUN BLOCKOUT SOLTIS PERFORM 92 SOLTIS HOTIZON 86 SOLTIS HARMONY 88 ■> SOLTIS OPAQUE B92 . SOLTIS PROOF W96 OPATEX FLAT FABRISCREEN • PRECONTRAINT 622 OSCURANTE PRECONTRAINT 302 CRISTAL CRISTAL RES. COPACO STAR...

Open the catalog to page 20

DICHIARAZIONE Dl PRESTAZIONE N. 00003-CPR-2022-01-27 Ai sensi dell'Allegato III del Regolamento (UE) n.305/2011 del 9 marzo 2011 modificato dal Regolamento Delegato (UE) n.574/2014 del 21 febbraio 2014 Uso previsto del prodotto: Tende per uso esterno Nome e indirizzo del fabbricante: KE PROTEZIONI SOLARI S.r.l., Via Calnova 160/a, Noventa di Piave (VE) - Italia Sistema di valutazione e verifica della costanza di prestazione: 4 Specifica tecnica armonizzata: EN 13561:2015 - Tende esterne e tendoni - Requisiti prestazionali compresa la sicurezza Classificazione secondo Prospetto 1 - §4.1 EN...

Open the catalog to page 21