WET-POUR POLYFLEX AEL-EX
1Pages

{{requestButtons}}

Catalog excerpts

WET-POUR POLYFLEX AEL-EX - 1

OUTDOOR SPORTS FLOORING WET-POUR POLYFLEX AEL-EX Outdoor highly flexible, acrylic system, ideal for tennis, basketball, volleyball, handball, football, multipurpose courts, as well as any other outdoor sports court. Combination of a mixture of PU BINDER 1118 plus RECYCLED RUBBER 858, in granulometry of 0.5-2mm, and acrylic coatings in total thickness of 8mm up to14mm. Steps: 1. PU PRIMER 870 - Special, polyurethane primer. Applied by airless sprayer or brush on asphalt surfaces or on waterproof concrete surfaces without rising humidity issues. 2. Mixture of PU BINDER 1118 and RECYCLED RUBBER 858, minimum 6mm - Elastic, shock-absorbent, wet-pour system. The RECYCLED RUBBER 858 is in granulometry of 0.52mm. The mixture is applied by paving machine in thickness of 6mm to12mm or more. 3. ELASTOTURF 851 - Acrylic, elastic, slip-resistant coating for sports floors systems. Consists of acrylic resins, quartz sand and special improver. Creates multi-purpose sports flooring systems. Highly resistant to adverse weather conditions (snow, frost, heat waves etc.) after drying. Applied by squeegee in 2 layers at least. 4. ELASTOMARK 818 - Elastic, acrylic coating for indoor and outdoor surfaces. Applied by short haired mohair roller and airless sprayer. Description PU PRIMER 870 - Special, polyurethane, prime. PU BINDER 1118 - Polyurethane binder. RECYCLED RUBBER 858 - SBR granules in granulometry of 0.5-2mm. 2 ELASTOTURF 851 - Acrylic, elastic, slip-resistant, coating for sports floors systems. 3-3.3kg/m ELASTOMARK 818 - Elastic, acrylic coating for indoor and outdoor surfaces.

Open the catalog to page 1

All KDF - Sports Flooring Production catalogs and technical brochures

  1. EPOXY DESIGN

    2 Pages

  2. MARMOR FLOOR

    2 Pages

  3. POLART FLOOR

    2 Pages

  4. COLORFLEX

    1 Pages

  5. FLEXFLOOR-EX

    1 Pages