*myarchiexpo

SPORTGROUND-EX

Product catalog summary

Introduction
This document outlines the steps and specifications for applying a resilient medium-hard acrylic flooring system suitable for sports grounds, cycling tracks, parks, and pathways. The system is certified by the LABOSPORT Institute and involves the use of specific acrylic products.

Specifications

RITIVEX R LIQUID 1102: An acrylic primer used as a base for acrylic coatings like ELASTOSPORT 853 or SUPER ELASTOCOAT 842. It is applied using an airless sprayer or brush.
ELASTOSPORT 853: A one-component acrylic resurfacer for sports floors, consisting of acrylic resins, quartz sand, and special improvers. It is applied with a squeegee on dry compact asphalt to seal porosity and smooth the surface before applying CORRIDOL 864. It is highly resistant to adverse weather conditions.
CORRIDOL 864: An acrylic, slip-resistant coating for outdoor surfaces, applied with a squeegee on waterproof, smooth concrete or asphalt surfaces. It is recommended to use ELASTOSPORT 853 beforehand to prepare the substrate. It is also highly resistant to adverse weather conditions.

Application Procedures

Apply RITIVEX R LIQUID 1102 as a primer.
Use ELASTOSPORT 853 to smooth and repair the surface.
Apply CORRIDOL 864 for a slip-resistant finish.

Consumption Rates

RITIVEX R LIQUID 1102: 21.5 kg/m² for 2 layers, depending on the porosity of the asphalt substrate.
ELASTOSPORT 853: 20.2-0.3 kg/m² for 3 layers.
CORRIDOL 864: 22 kg/m² for 1 layer.

Catalog excerpts

CYCLING TRACKS SPORTGROUND-EX Outdoor resilient medium-hard acrylic ﬂooring system ideal for surrounding areas in sports grounds, cycling tracks, parks, pathways etc. Combination of wet-pour acrylic coatings in total average thickness of 2.2mm. Certiﬁed system by LABOSPORT Institute. Steps: 1. RITIVEX R LIQUID 1102 - Acrylic primer. Used as primer of acrylic coatings, such as ELASTOSPORT 853 or SUPER ELASTOCOAT 842. Applied by airless sprayer or brush. 2. ELASTOSPORT 853 - Acrylic, one component, smoothing and repairing wet-pour resurfacer for sports ﬂoors systems. Consists of acrylic resins, quartz sand and specials improver. ELASTOSPORT 853 is applied by squeegee on dry compact asphalt to seal the porosity and smooth out the surface before the application of CORRIDOL 864. Highly resistant to adverse weather conditions (snow, frost, heat waves etc.) after drying. 3. CORRIDOL 864 - Acrylic, slip-resistant coating for outdoor surfaces. It is applied by squeegee on waterproof, smooth, concrete surfaces, without rising humidity issues, or asphalt surfaces. Prior application of ELASTOSPORT 853 is recommended to ﬁll in and smooth out the underlying substrate. Highly resistant to adverse weather conditions (snow, frost, heat waves etc.) after drying. Description RIΤIVEX R LIQUID 1102 - Acrylic primer. ELASTOSPORT 853 - Acrylic, one component, smoothing and repairing wet-pour resurfacer for sports ﬂoors systems. CORRIDOL 864 - Acrylic, slip-resistant coating for outdoor surfaces. 2kg/m2 for 2 layers depending on the porosity of the asphalt substrate

Open the catalog to page 1

SPORTGROUND-EX

SPORTGROUND-EX

Catalog excerpts

All KDF - Sports Flooring Production catalogs and technical brochures