PU BINDER 1118
2Pages

Catalog excerpts

KDF Sports Flooring Systems & Building Materials PU BINDER 1118 POLYURETHANE BINDER GENERAL CHARACTERISTICS 100% solids, aromatic, polyisocyanate-prepolymer, moisture-curing binder based on diphenylmethane diisocyanate. It is MDI based and solvent free and has low viscosity. It exhibits excellent adhesion to all rubber granules and gives a strong performance both in terms of tensile strength and durability. It is mixed with RECYCLED RUBBER 858 or EPDM granules for the creation of the elastic safety flooring SAFEPOL MULTICOLOR or other flexible rubber floorings, ideal for playgrounds, athletic tracks, schools etc. Combines and bonds RIM components, polyurethane granules and sponge particles. Also it can be used as lining for insulation and for pasting. Application temperature Curing (25°C and %60 relative humidity) TECHNICAL DATA After 24 hours it cures. Applied on dry surfaces without rising humidity issues, free of materials that might prevent bonding e.g. dust, loose particles, grease etc (in case of asphalt or concrete). The success in the application depends on the right preparation of the underlay and use of the material. Good, dry cleaning of the surface from dust and residues using vacuum cleaner and squeegees. Can be used for kids playground, running tracks, sports grounds, walkways and offices. Moulded in production: Rubber granules and binder are thoroughly mixed, taken into moulds, and then pressure is applied. 160 bar pressure, mold temperature of 130 degree gives reasonable results in 12 - 15 minutes. In molding applications, binder content should not fall below 5%. On-site applications: Applied on dry surfaces, free of materials that might prevent bonding e.g. dust, loose particles etc (in case of asphalt or concrete). The success in the application depends on the right preparation of the underlay and use of the material.    Good, dry cleaning of the surface from dust and residues. Priming of the surface with the special POLYURETHANE PRIMER 870 in two layers. Good mixing of the PU BINDER 1118 and the RECYCLED RUBBER 858. Mixing should KDF - Kataskeves Dapedon LTD e : exports@kdf.gr w : www.kdf.gr Showroom Office 1 Papanikolaou Ave, Pefka 57010, Thessaloniki, Greece t / f : 0030 2310 829598 Accounting Office 19 Mitropoleos Str 54624, Thessaloni

Open the catalog to page 1

KDF Sports Flooring Systems & Building Materials RATIO MIXTURE be performed using a low revolution mixer (300-600 rpm) for 1-2 min. Stirring of the mixture should be performed thoroughly near the sides and bottom of the container in order to achieve homogeneity. Following, the mixture is poured on the surface and spread on the desired thickness using paving machine or by hand, if the applicator is experienced, with rake for spreading, (wooden) straightedge for initial smoothing, flat metal trowel for final smoothing and compacting, cylinder weighing 8-15kg for final compacting-(cylinder...

Open the catalog to page 2

PU BINDER 1118 2Pages

Catalog excerpts

All KDF - Sports Flooring Production catalogs and technical brochures

PU BINDER 1118
2Pages