INDOOR SPORTS FLOORING POLYFLEX AEL-IN Indoor highly flexible shock-absorbent, acrylic sports flooring system, ideal for multipurpose halls, gym floors, tennis, basketball, volleyball, handball, footsal courts, as well as any other indoor sports court. Combination of prefabricated shock-pads with top coating in average total thickness of 8-14mm. Steps: 1. PU FLEX 140 - Special, polyurethane, two component, adhesive. It is applied, with V-notch trowel, on dry waterproof surfaces of concrete without rising humidity issues or asphalt. Used for the application of ISOPOL 854 shock-pads or other prefabricated shock-absorbent rolls made from recycled rubber or EPDM. 2. ISOPOL 854 - Shock-pad in rolls. Elastic, prefabricated shock-pad made of recycled rubber providing shock-absorbency, in thickness of 4mm up to 12mm. Used as cushion substrate before the application of polyurethane or acrylic systems. 3. ELASTOTURF 851S - Acrylic, elastic, smooth, coating for sports floors systems. Consists of acrylic resins, powder quartz sand and special improver. It is combined with ISOPOL 854 as substrate to create multi-purpose sports flooring systems. Highly resistant to adverse weather conditions (snow, frost, heat waves etc.) after drying. Applied by squeegee. 4. POLYSPORT 952 - Polyurethane, aliphatic, twocomponent top coating for indoor sport floorings. Applied, in two crossing layers by airless sprayer or short haired mohair roller. Description PU FLEX140 - Special, polyurethane, two-component adhesive. ISOPOL 854 - Shock-pad in rolls. ELASTOTURF 851S - Acrylic, elastic, smooth coating for sports floors systems. POLYSPORT 952 - Polyurethane, aliphatic, two-component top coating for indoor sport floorings.