JOGGING TRACKS POLTRACK JOGGING TRACK Elastic, seamless, flexible coloured flooring, ideal for jogging tracks. It consists of a shock-pad base of 2 layers, first layer is a base layer of SBR granules (granulometry 2-5mm or 3-5mm) and second layer a base of flexible, colored EPDM granules(0.51.5mm). Then follows a PU flexible pore filler coating, POLYSPORT STUCCO 1050, in 2 layers and a sealing PU, UV-resistant aliphatic top layer, POLYSPORT 1052, in two crossing layers. Certified system by LABOSPORT Institute. Steps: 1. PU PRIMER 870 - Polyurethane primer. Applied by airless sprayer or brush. 2. Mixture of PU BINDER 1118 and RECYCLED RUBBER 858 (in granulometry of 2-5mm or 3-5mm) applied by paving machine. 3. Mixture of PU BINDER 1118 and EPDM 856 (in granulometry of 0.5-1.5mm) applied by paving machine. 4. POLYSPORT STUCCO 1050 - Polyurethane, elastic, twocomponent pore filler. Used for sealing porous prefabricated subfloor of sports floorings such as ISOPOL 854 or wet-pour cushion shockpads. Applied by flat trowel. 5. POLYSPORT 1052 - UV-resistant, polyurethane, twocomponent, top coating for outdoor sports floorings. Applied, in two crossing layers by airless sprayer or a short haired mohair roller. Description PU PRIMER 870 - Polyurethane primer. BASE LAYER PU BINDER 1118 - Polyurethane binder. RECYCLED RUBBER 858 in granulometry of 2-5mm or 3-5mm. TOP LAYER PU BINDER 1118 - Polyurethane binder. EPDM 856 in granulometry of 0.5-1.5mm. SEALING LAYER POLYSPORT STUCCO 1050 - Polyurethane, elastic, two-component pore filler. TOP COATING POLYSPORT 1052 - UV-resistant, polyurethane, two-component, top coating for outdoor sports floorings