POLART TEXTURED WITH ACRYLIC STAINS
12Pages

POLEPOX-PR 824 TRANSPARENT, EPOXY-BASED RESIN, USED AS AN ADHESIVE COMPONENT BETWEEN CONCRETE SURFACES AND EPOXY COATINGS GENERAL CHARACTERISTICS POLEPOX-PR 824 is a clear, epoxy, two-component resin, which is used as an adhesive component between concrete surfaces and final epoxy coatings.  Eliminates dust from decay in old & new floorings, reinforcing their durability. Offers high mechanical resistance and chemical protection against acid solutions, alkalis, oil, grease etc. It can be easily repaired locally if necessary, but must precede grinding of the surface with a sandpaper or mosaic machine. two-component epoxy resin liquid Application time: Final strength: Adhesive strength: Temperature for the application and drying of the material: SUBSTRATE REQUIREMENTS Basis: Appearance: TECHNICAL DATA Concrete quality: Moisture content:

PREPARATION APPLICATION Applied only on dry surfaces. Protected from arising humidity and free of materials that might prevent bonding e.g. dust, loose particles, grease etc. The success in the application depends on the right preparation of the underlay and use of the material.  Treatment of the surface with a mosaic machine, or with sandblast or rotor machine, depending on the thickness of the final coating. Good, dry cleaning of the surface from dust and residues with vacuum cleaner and use of squeegees. Caution must be taken so that temperature of the substrate as well as ambient air...

Working time of POLEPOX-PR 824 decreases when ambient temperature rises. Prolonged storage of partially used containers must be avoided as contact with atmospheric moisture will result in skinning and clouding of the product. It cannot be applied in thickness for filling cracks or holes. In this case it can only be used if mixed with fine dry sand. Do not mix or apply unless surface, air and material temperatures are over 12°C during the next 24 hours. Do not apply to floors if there is moisture in the subfloor drive or hydrostatic pressure. Prior precautions measurements of humidity with...

POLART FLOOR LIQUID MICROTTOPING FLOORING GENERAL CHARACTERISTICS POLART is polymer-modified, colored, smooth or textured, in-situ (wet-pour) applied cast decorative, cement-based, microtopping flooring. Possesses superior strength and can satisfy the most demanding requirements in aesthetics, style and uniqueness while giving the appearance of an antique flooring. It creates a uniform, roomy floor with the possibility of either shiny or mat final surface look, imparted by special resins used on the top. It can come in endless versions in shade, texture or design, depending on the...

SUBSTRATE REQUIREMENTS Moisture content: Concrete quality: Applied only on dry surfaces. Protected from arising humidity and free of materials that might prevent bonding e.g. dust, loose particles, grease etc. The success in the application depends on the right preparation of the underlay and use of the material. The substrate has to be as smooth as possible (a cement/concrete screed or something like that). Superficial expansion joints have to be provided (approximately every 15m² -in a grid of 4m X4m or something like that). Then the stages are as follows:   Good, dry cleaning of the...

APPLICATION TOOLS Flat metal trowel. Tools should be cleaned with WATER immediately after use. 1 year in original unopened containers in dry places with minimum temperature 5 C and o maximum temperature 35 C, protected from moisture and heat. Working time of POLART decreases when ambient temperature rises. Do not mix or apply unless surface, air and material temperatures are over 12°C during the next 24 hours. Prolonged storage of partially used containers must be avoided as contact with atmospheric moisture will result in skinning and clouding of the product. Do not apply to floors if...

ACRYLIC STAINS ACRYLIC-BASED CHEMICAL STAIN FOR CONCRETE GENERAL CHARACTERISTICS KDF ACRYLIC STAIN is a penetrating, acrylic-based stain used to color old or new concrete. KDF ACRYLIC STAIN provides a translucent, permanent color with a shaded marbled effect, similar to the aged appearance of natural stone. KDF ACRYLIC STAIN's rich variegated finish will not peel, crack, chip, or fade from UV light. KDF ACRYLIC STAIN can also be used over concrete overlays and over stamped concrete floorings.     Applied on integrally-colored concrete or over color-hardened concrete. Provides variegated...

does not exceed 75%. PREPARATION For best results, concrete must cure for a minimum of 30 days. Concrete should be clean and free of curing compounds, sealers, paints, coating and other bond breakers. Old paint or coatings must be removed mechanically. Oil, grease, and dirt must be removed, rinsed or pressure washed thoroughly, and the surface allowed to dry completely. Concrete must be etched, because a profiled porous surface is required. So it is strongly recommended the usage of special chemical cleaning with the parallel wash out with water under pressure. When the surface is...

• Stained concrete must be protected from any source of water or excessive moisture. Material will not freeze in storage but should be allowed to rise to 10 °C or more before use. • Excessive build-up of STAIN SEALER or puddling of the product during application can lead to bubbling and discoloration. • Do not mix or apply unless surface, air and material temperatures are over 12°C during the next 24 hours or if rain is expected within 12 hours after application. • Do not apply to floors if there is moisture in the subfloor drive or hydrostatic pressure. Prior precautions measurements of...

GENERAL CHARACTERISTICS POLFLOOR-PU 807 is polyurethane-based, anti-dust, transparent or colored, two-component resin.  Creates colored, easy-to-clean indoor or outdoor floorings. Ideal for old and new surfaces, for light and middle circulation such as industrial, troweled floorings, mosaics, cement surfaces, workshops, and storehouses. Suitable even for metallic surfaces and for painting swimming pools. Provides permanent protection from U.V. radiation. Eliminates dust and decay from old & new floorings, reinforcing their durability. Offers high mechanical resistance and chemical...