INSULATED EXTERIOR ACCESS DOOR Model MX-PL (New Model) For All Types of Construction DATE KARP ASSOCIATES, INC. 260 Spagnoli Road Melville, NY 11747 (631) 768-8300 - Phone (631) 768-8350 - Fax PROJECT DATA Project Name: GENERAL SCOPE: Access doors shall be Karp Type MX-PL as manufactured by Karp Associates, Inc., Melville, N.Y. Sizes shall be as indicated on the drawings. CONSTRUCTION: 1. Frame shall be 18 gauge galvannealed steel. 2. Door shall be 18 gauge galvannealed steel. 3. Door shall be welded, watertight pan. 4. Frame shall be surrounded by 22 gauge expansion casing bead with metal lath. 5. Gasketing between door and frame 3/8" wide by 1/8" thick closed cell neoprene gasketing. 6. Insulation shall be 1" thick polystyrene w/ 5.0 R-value @ 75 degree F temperature. 7. Hinge shall be continuous galvanized piano hinge. 8. Latches shall be Lift & Turn Compression Latch including cup sealing gasket finished in textured chrome. Keyed. 9. Finish shall be prime coat of rust inhibitive electrostatic powder, baked white enamel. Special Instructions: Agent/Customer Name: Tagging Instructions: STANDARD SIZES (Special sizes on request) DOOR SIZE H X W (IN.) NUMBER OF STUD LATCHES KEYED COMPRESSION LATCH H H + 6 1/4" *Available in stainless steel CONTINUOUS PIANO HINGE GALVANIZED STEEL LATH WING Pre-drilled Mounting Hole for Installation 3/8" x 1/8" THICK CLOSED CELL NEOPRENE GASKETING 1 layer of 1" Thick Polystyrene Installation with 5.0 R-Value 2.675" 18 GAUGE GALVANNEALED FRAME 18 GAGE GALVANNEALED STEEL DOOR KEYED COMPRESSION LATCH W Lath Bead Made with Union Labor