ALUMINUM DRYWALL ACCESS DOOR Model KAD For All Types of Construction DATE KARP ASSOCIATES, INC. 260 Spagnoli Road Melville, NY 11747 (631) 768-8300 - Phone (631) 768-8350 - Fax PROJECT DATA Project Name: GENERAL SCOPE: Access doors shall be Karp Type KAD as manufactured by Karp Associates, Inc., Melville, N.Y. Sizes shall be as indicated on the drawings. Contractor: Agent/Customer Name: Tagging Instructions: Special Instructions: CONSTRUCTION: 1. Trim assembly shall be 4-piece aluminum extrusion. 2. Door assembly shall be 4-piece aluminum extrusion with drywall installed. 3. Depth of the Frame shall be 0.75" and is designed for 5/8" drywall with 0.125" compound applied at installation. 4. Gasketing between door and frame shall be 0.6" wide by 0.125" thick continuous gasket. 5. Door drywall insert shall be 5/8" thick. 6. Latch shall be concealed mechanical touch-latch. 7. Hinge shall be free pivoting hinge. 8. Finish shall be unpainted mill-finish aluminum. 9. Door assembly can be completely removed for maximum clearance. 10. Safety cable must be installed to connect door and frame assembly. STANDARD SIZES (Special sizes on request) DOOR SIZE H X W (IN.) Aluminum Door Assembly 1 1 4" Self Drilling Drywall Screw A Aluminum Trim Assembly self drilling drywall screws approximately 4" on center and MIN. 2" from corner & MIN. 5" from the edge 8 on all 4 sides of trim (supplied + installed by contractor) Wall Opening = W + 3/8" Inner Layer GWB Concealed Mechanical Touch Latch Safety Cable Gypsum Wall Free Pivoting Hinge Continuous Gasket Gypsum Board Aluminum Door Assembly Aluminum Trim Assembly 1 1 4" Self Drilling Drywall Screw by contractor Made with Union Labor