Sealants, Caulking, Flooring Read Material Safety Data Sheets before using this product. (trowel grade) DESCRIPTION: Karnak #230-2% Neo-Asphalt is a cold applied, rubberized asphalt cement, designed especially for use as an adhesive for paving blocks and pressed asphalt bricks. Eliminates the need for a hot kettle. SURFACE PREPARATION: All surfaces should be clean, free from oil, grease or other foreign matter. APPLICATION: Karnak #230-2% Neo-Asphalt can be applied to either concrete or macadam (blacktop) using a 1/16” serrated trowel. For best results, Karnak #230 2% NeoAsphalt should be allowed to have a minimum of 2-3 hours open air time or until material becomes tacky and just skins over, prior to embedding the asphalt bricks. COVERAGE: Apply at the rate of 1.5 - 2 gallons per 100 sq. ft. Do not exceed coverage rate. 30,000-40,000 C.P .S. 1.02 8.5 lbs. 68% 150F 18% 10% 2% min. CAUTION: Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. Sealants, Caulking, Flooring PHYSICAL PROPERTIES: Viscosity @ 25C: Specific Gravity @ 25C: Weight per Gallon @ 25C: % Solids by Weight: Softening Point of Rubber Blend: % Inorganic Material: % Long Fiber % Neoprene CARE OF TOOLS: Tools and other equipment should be thoroughly cleaned with mineral spirits, taking necessary precautions when handling combustible materials. PACKAGING: Available in 5 gallon pails and 55 gallon drums. If further information is needed, contact Karnak Technical Services at 1-800-526-4236. Please see page 222 for additional mold and safety information. 330 CENTRAL AVENUE, CLARK, NJ 07066 732-388-0300 • 800-526-4236 • FAX: 732-388-9422 WEB: http://www.karnakcorp.com