Read Material Safety Data Sheets before using this product. Trowel Grade – Apply to either vertical or horizontal surfaces using a smooth edge trowel. Coverage will vary depending on the desired thickness. To achieve a 1/16” thickness apply at the rate of 4 gallons per 100 sq. ft.; 1/8” thickness apply at the rate of 8 gallons per 100 sq. ft.; ¼” thickness apply in two coats at the rate of 8 gallons per 100 sq. ft. per coat. Brush Grade – Mix thoroughly just prior to using. Apply to horizontal roof surfaces with a fiber roof brush at the rate of 3 to 4 gallons per 100 sq. ft. Coverage will vary depending on the irregularity and porosity of the roof surface. Caulk Grade – Apply directly in and over cracks using a standard caulking gun. An application rate of ¼” x ¼” bead of caulk will yield approximately 75 linear feet per 30 oz. caulking cartridge. Coverage may vary depending on desired thickness and surface being caulked. SPECIFICATIONS: ASTM D-4586 Type I Class I ASTM D-4479 Type I ASTM D-3409 Complies with CH. 13 of Massachusetts Energy Code PHYSICAL PROPERTIES: Weight Per Gallon: 8.6 lbs. Hardness, Shore A: 55 ASTM D-2240 Elongation: 350% ASTM D-412 Tensile Strength, PSI: 400 ASTM D-412 Color: Black Water Vapor Permeance: 0.017 perm ASTM E-96 Air Permeability (Leakage): 0.000 L/(s·m2) @ pressure difference of 75 Pa Service Temp. Range: -40ºF to 160ºF Solids: Trowel 70%, Brush 63%, Spray 60% ASTM D-2697 VOC Content: Please visit www.karnakcorp.com for latest VOC content as products are updated to comply with the most current VOC regulations 330 CENTRAL AVENUE, CLARK, NJ 07066 732-388-0300 • 800-526-4236 • FAX: 732-388-9422 WEB: http://www.kar

Read Material Safety Data Sheets before using this product. 229AR Elastomeric CAUTION: Do not use near open flame. Avoid breathing solvent fumes and prolonged contact with skin. Do not take internally. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Keep container covered when not in use. Do not thin. Dispose of in an environmentally safe manner. CARE OF TOOLS: Tools and other equipment should be thoroughly cleaned with 709 Karna-Klean. Mineral spirits or similar solvent may also be used, taking necessary precautions when handling combustible...