Catalogs >
Kalzip >
Kalzip wall systems product

Kalzip wall systems product
4Pages

Catalog excerpts

Kalzip wall systems Kalzip wall systems provide a cost effective solution suitable for a wide range of applications. Two new profiles are illustrated. The MT33/1000R offer a unique half round and micro-ribbed finish. The TF37/800R provides an equally unique appearance. Both products share a common support grid which can be easily adapted to give the required thermal performance. In addition, the use of mineral wool insulation in a wall build up, ensures a non-combustible building envelope solution. Specifying a Kalzip wall system in addition to our standing seam roof constructions enables a co-ordinated approach to achieve a weather tight envelope. Use of the Kalzip Teamkal contractor network ensures no division of responsibility between roof sheeting and wall cladding. A single source of materials and components installed by a dedicated trained installer ensures a safe, risk-free solution from Kalzip. • Built up wall construction • A variety of external finishes • Fully systemised approach • ADL2 compliant • Aluminium and steel applications • Comprehensive design support product review Photography courtesy of Zander Olsen

Open the catalog to page 1

MT33/1000R Profiled cladding Applications MT33/1000R is available in colour-coated aluminium or galvanised steel in gauges of 0.7mm, 0.8mm and 1.0mm. This profile can be assembled on masonry/blockwork or steel liner built-up systems. A variety of components and options are available to meet all requirements and applications. Aluminium Aluminium alloy to EN AW 3105 is available in sheet lengths of up 6000mm pre-painted using polyester or PVdF finish, in a wide range of colours. Steel Galvanised steel to EN 10142 is available in sheet lengths of up to 12000mm and can be provided in stucco...

Open the catalog to page 2

TF37/800R Profiled cladding Applications Fixed to bracket and bar support grid over liner and onto side rails, the insulation cavity can be fully sealed including a vapour control layer, or ventilated with a breather membrane over slab insulation. Materials and finishes The TF37/800R profile is available in PVdF painted-coated aluminium alloy EN AW 3004 in gauges of 1.0mm or 1.2mm. The unique twin triangular profile creates a distinctive wall element, especially when contrasted with other façade materials and finishes. Kalzip TF37/800R aluminium - wind pressure/suction (kN/m2) - multiple...

Open the catalog to page 3

www.kalzip.com Care has been taken to ensure that this information is accurate, but Corus Group PLC – including its subsidiaries – does not accept responsibility for information which is found to be misleading. Copyright 2005 Corus Building Systems Corus Building Systems Haydock Lane Haydock St Helens Merseyside WA11 9TY T +44 (0) 1942 295500 F +44 (0) 1942 272136 Email: kalzip-uk@corusgroup.com English

Open the catalog to page 4