Kalzip® Roof Anchors Technical data sheet 10/06-3-004 Kalzip® roof anchor Kalzip® tapered roof anchor The products Areas of application The Kalzip roof anchors for straight and tapered Kalzip® roof anchors are only authorised for personal Kalzip sheets have been specially designed as a safety systems (they are not suitable for attaching Class A individual fixing device in accordance with loads) and depending on specification can be used DIN EN 795 for use with personal fall arrest systems. for straight and tapered Kalzip® sheets Kalzip® roof anchors can also be used as external and • with straight Kalzip® sheets: ® intermediate anchors for Class C design-approved fixing devices in accordance with DIN EN 795. On grounds of technical safety they are recommended for all buildings, in particular for recurrent main- suitable for all approved construction widths between 305 and 434 mm • with tapered Kalzip® sheets with a seam spacing of max. 600 mm (tested only up to 434 mm) tenance work (e.g. for building facilities services). Kalzip® roof anchors must only be attached onto When used as an external anchor the maximum load Kalzip® aluminium sheets. must not exceed 6.5 kN.

Technical data sheet 10/06-3-004 Technical Data stainless steel/aluminium Product advantages • Tested in accordance with DIN EN 795 (DMT) • High level of safety due to large load bearing • Large safety reserves • Versatile, depending on specification can be used for straight and tapered sheets • Quick and simple assembly • Penetration-free attachment The Kalzip® roof anchors have been tested by EXAM (for straight Kalzip® sheets) (for tapered Kalzip® sheets) The test report is available on request (only in German). Installation of the Kalzip® roof anchor and Kalzip® tapered roof anchor The Kalzip®...