KALLISTA Pleo® Wall-Mount Toilet FEATURES • One-piece, wall-mount toilet • Compact elongated bowl offers comfort while occupying the same space as a round-front bowl • Skirted bowl allows for easy cleaning and eliminates potential debris build-up • Adjustable durable steel frame carrier allows bowl to be positioned 15-3/8" (391 mm) to 28-1/2" (724 mm) from floor • Dual-flush actuator offers a choice of 1.0 gpf (3.8 lpf) or 1.6 gpf (6.1 lpf) • Actuator with glass plate can be removed for easy access to inner tank CODES/STANDARDS APPLICABLE • ASME A112.19.2/CSA B45.1 • ASME A112.19.14 • EPA WaterSense® • ASME A112.6.2 • Optional 90 degree cast iron waste pipe for use where required by code INSTALLATION NOTES Install this product according to the installation guide. Installation requires 2x6 framing. PRODUCT INFORMATION The recommended install height from the finished floor to the toilet rim is 16-1/8" (410 mm). In-wall tank and carrier system install in wall opening 5-1/2"(140 mm) x 19" (483 mm) x 50" (1270 mm) minimum. Refer to manufacturer and local codes for flush valve requirements. Shall not be installed on exterior walls where it can be exposed to extreme temperatures. Maximum inlet water temperature shall not exceed 80°F (26.7°C). SPECIFIED MODEL We reserve the right to make revisions without notice in the design of products or in packaging unless this right has specifically been waived at the time the order is accepted. Questions? Problems? For additional assistance, please contact KALLISTA’s Customer Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com