Fire protection solutions for electrical installation
40Pages

Fire protection. Box, housing and sealing systems for fire-protection walls and ceilings.

For safe functions, rooms and escape routes. Fire protection engineering. When it comes to structural fire protection, building technology planners and installers face particular challenges. Experience shows that a fire can start anytime, anywhere. Even strict fire regulations offer no guarantee in this respect. The greatest potential danger is not the building itself, but the technical and electrical systems. For 90% of fire victims and around 70% of property damage, it was not the fire itself but dangerous, toxic smoke that was the decisive factor. In addition to preventing and fighting...

Fire protection Legal requirements Fire Protection Engineering. Building material classes and fire resistance classes. DIN 4102. Keeps the way clear in an emergency. Kaiser AFS technology. KAISER has Europe-wide approvals for fire barriers. KAISER installation. Simple and safe. Safety and fire protection in electrical installations. Fire resistant and halogen free. Product solutions Installation in walls Professional and standardised For fire protection walls up to EI120 or F60-B, installation shafts and ducts. Safe in cavity walls. Penetrations and entries in cavity walls, masonry and...

Legal requirements. Fire protection engineering. Building law in Germany falls under the jurisdiction of the federal states due to federalism. As part of a joint working group (ARGEBAU), the state ministries responsible for construction develop draft model laws, which can then be implemented as laws, ordinances or guidelines that are valid in the individual state with varying degrees of modification, depending on the respective federal state. Section 14* of the Model * Section 14 MBO Fire protection Nov. 2002 Structures shall be arranged, erected, altered and maintained in such a way that...

Technical information Residential buildings Buildings > 22m Upper edge floor ≤ 22 m Upper edge floor ≤ 13 m with low height Ground ladder accessible H ≤ 8 m Upper edge floor ≤ 7 m Upper edge floor ≤ 7 m Fire brigade with extension ladders • Free standing buildings • Other buildings • Other buildings Usable units including underground and • Freestanding agricultural or forestry buildings DIN 4102 defines the requirements of the wall and ceiling properties for the fire resistance classes. The prescribed fire resistance class depends on the building use and the building class (see table...

building materials A1 non-combustible without organic components building materials with organic A2 non-combustible components building materials B2 combustible normal flammability combustible building materials flame resistant Building material classes and fire resistance classes. DIN 4102. The fire behaviour of building materials for walls or ceilings is influenced by the type, shape, surface, mass, material joints and processing technique. Building materials are classified according to fire classes A or B: Building material class - non-combustible building materials A1 - without organic...

Technical information Measuring points Measuring points Measuring points 1 + 2 Installation of EI90 metal stud walling in compliance with DIN 4102, Part 4. 3 Structure of an EI90 solid wall. 4 Suspended ceilings under raw ceilings according to DIN 4102-4 of construction type I, II, III. Ceiling constructions consisting of raw ceilings and suspended ceilings provide the required fire resistance. 5 Self-contained suspended ceilings. Independent suspended ceilings provide the required fire resistance independently of raw ceilings. 6 Fire load from the ceiling cavity. Walls and ceilings. DIN...

Keeps the way clear in an emergency. Kaiser AFS technology. AFS - Active Fire Stop - guarantees preventive fire protection. Whether the fire load comes from above, below, from the front or the back: the quick-active, fire-retardant coating in boxes, housings and bulkheads reacts immediately in the event of fire and safely fills the installation opening with foam. The fire resistance class for the wall of EI30 - EI120 or for the ceiling of EI30 - EI90 remains unchanged. Transmission of fire and smoke is thus safely prevented. The high standard and reliability of AFS technology ensure that...

Fire protection chtigt Ermä i f i z i e r t de r not u n d Ar ti ke l 10 vo m te s g em äßie des Ra zur Anund Ri ch tlin mb er 1988 chtsze 21. De ung der Re sc hr ift en gle ich al tu ng sv ors t aa t en Ve rw M i t g li e d du kt e d er up ro G) Ba üb er 06/EW (89/1 päis Euro ichn lsbeze Handee name . KG & CO MBH ER G KAIS oh 4 ühle Ramsl Schalksm 9 5857 CHLAND S DEUT en ttung abscho Kabel s n seal tratio ne pe cable er nhab al sungsi Zulas r of approv olde H KAISER Fire Barrier Systems Europe-wide certified quality! stand egen weck sz sungsg Zulas wendung er e und V type and us uct od ic...

Sound insulation value R ’w to Professional and standardised. Flush-mounting fire-protection box. The innovative fire protection box for flush-mounted installation in solidly built fire protection walls maintains the fire resistance duration of the fire protection wall from F30-F120 (EI30-EI120) despite the electrical installation embedded in it. The flush-mounted fire protection box ensures a safe, smokeproof closure of the fire protection wall, even if the opposing or single-sided installation falls below the residual wall thickness of 60 mm required by DIN 4102-4. This is made possible...

Fire protection | Flush-mounted fire protection box • For EI30-EI120 fire-protection walls • For minimum remaining wall thicknesses ≤ 60 mm • Also for direct installation to the opposing side • Installation up to 5-unit combinations • Variable combination connection piece for conduits up to M25 • With a fire-protection cover, it can be used as a junction box KAISER's new flush-mounting fire-protection boxes are the first of their kind to prevent the spread of fire and smoke through installation openings in solid fireprotection walls. Effective fire-protection is provided even when the...