Damp room one-gang junction box
Damp room one-gang junction box
The document details the specifications and installation procedures for a damp room one-gang junction box, certified according to DIN 18534. This product is designed for professional incorporation into sealing systems in damp environments such as commercial kitchens, bathrooms, and hospital damp rooms.
Specifications:
- Installation opening diameter: Ø 68 mm
- Depth: 62 mm
- Panel thickness compatibility: 7 - 40 mm
- Screw spacing: 60 mm
- Wire entries: Up to Ø 11.5 mm, six air-tight and watertight entries
- Certified water tightness according to DIN 18534
- Art. no.: 9264-42
- Packaging: Inner/dispatch 10 / 100
Installation Procedure:
- Create a precise installation opening of Ø 68 mm using the KAISER cutter EXPERT (Art. no. 1082-30).
- Apply the sealing layer, such as sealing slurry.
- Gradually remove the backing film, align the box in the installation opening, and spread the sleeve to bond it to the wall surface.
- Fix the installation accessories using device screws.
- Secure the box in the installation opening with lug mounting.
- To comply with the IP protection class, fit the plaster equalising ring (Art. No. 9155-61 or -62) for structural wall coverings > 10 mm.
- Open the wire entries using the KAISER universal opening cutter (Art. no. 1085-80) and insert electric cables up to Ø 11.5 mm.
- Apply the wall covering, such as tiled walls.
Additional Information:
For more details about the certificate and product, visit the KAISER website at www.kaiser-elektro.de. Contact information: KAISER GmbH & Co. KG, Ramsloh 4, 58579 Schalksmühle, Germany. Tel: +49 (0) 23 55 / 809-0, Fax: +49 (0) 23 55 / 809-21, Email: [email protected].
Catalog excerpts
Damp room one-gang junction box. Certified according to DIN 18534. For the professional incorporation of electrical installations into the sealing system in the damp room.
Open the catalog to page 1
Open the wire entries using the KAISER universal opening cutter (Art. no. 1085-80) and insert the electric cables up to Ø 11.5 mm. Gradually remove the backing film, align the box in the installation opening and then spread the sleeve to bond it to the wall surface. Fix the box in the installation opening by means of lug mounting. Application of the sealing layer (e.g. sealing slurry). Application of the wall covering (e.g. tiled walls). Fixing the installation accessories using device screws. To comply with the IP protection class, the plaster equalising ring (Art. No. 9155-61 or -62) can be...
Open the catalog to page 2All KAISER catalogs and technical brochures
UP¹ ECON® Fix1 Page
B2 conduit connectors4 Pages
AGRO Cable Glands356 Pages
Trilo2 Pages
INNOVATIONS 2024/202524 Pages
