Catalogs >
K-array >
Vyper-KV52 II

Vyper-KV52 II
3Pages

Catalog excerpts

Vyper-KV52 II Ultra-flat aluminum half-meter frameless line array element with 1” drivers Description Vyper-KV52II and Vyper-KV52RII are ultra-flat passive loudspeakers comprised of eight 1” neodymium magnet transducers each, housed in elegant yet sturdy aluminum chassis. The new frameless chassis of the Vyper-KV52II is perfect for a clean bracketless installation on any flat surface or where in-wall mounting is needed. The eight closely-spaced cone drivers provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker. Two different values of impedance (16Ω – 64Ω) allow to connect up to 16x Vyper-KV52 II loudspeakers at 64Ω impedance to the same 4Ω amplifier output channel, which eliminates the need of 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory. All Vyper-KV52 components are designed by the K-array R&D department and are custom made under the K-array quality control system • • • • • • • • • • • 8x 1” Neodymium magnet woofers 114 dBpeak max SPL Pure Array Technology 10° vertical dispersion, 140° horizontal coverage 16Ω – 64Ω selectable load impedance Visually discreete Modular capabilities allow the joining of more units for long array IP65 suitable for indoors and outdoors installations with included IP accessory Aluminum chassis Available in black, white and custom RAL color 24K Gold, Polished and Brushed premium finishes available Vyper-KV52R II Ultra-flat aluminum half-meter flush

Open the catalog to page 1

Vyper-KV52 II - Vyper-KV52R II Technical Specifications Type Passive line array loudspeaker 8x 1” Neodymium magnet woofers Power Handling Nominal Impedance Handling & Finishes Black, White, Custom RAL Dimensions (WxHxD) With dedicated preset. Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m. Notes: Passive loudspeakers require dedicated presets loaded onboard K-array amplifiers. New materials and designs are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this...

Open the catalog to page 2

Project Vyper-KV52 II Code Designer K-array surl via P. Romagnoli 17 50038 Scarperia e San Piero - Firenze - Italy Tel: +39 055-8487222 - www.k-array.com Project Vyper-KV52R II Code Designer Notes: Passive loudspeakers require dedicated presets loaded onboard K-array amplifiers. New materials and designs are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalog. K-array surl via P. Romagnoli 17 50038 Scarperia e San Piero Tel: +39 055-8487222 - www.k

Open the catalog to page 3

Vyper-KV52 II 3Pages

Catalog excerpts

All K-array catalogs and technical brochures

Vyper-KV52 II
3Pages