1. Catalogs
  2. K-array
  3. Vyper-KV102 II

Vyper-KV102 II

Vyper-KV102 II

Vyper-KV102 II

Product catalog summary
Product Overview
The Vyper-KV102 II and Vyper-KV102R II are ultra-flat passive loudspeakers designed for seamless integration into various environments. Each unit features sixteen 1” neodymium magnet transducers housed in a sleek aluminum chassis, offering both aesthetic appeal and robust performance.

Design and Installation
The frameless design of the Vyper-KV102 II allows for clean, bracketless installations on flat surfaces or in-wall mounting. The speakers are available in black, white, and custom RAL colors, with premium finishes such as 24K Gold, Polished, and Brushed.

Technical Specifications
  • Type: Passive line array loudspeaker
  • Transducers: 16x 1” Neodymium magnet woofers
  • Frequency Response: 150 Hz - 18 kHz (-6 dB)
  • Max SPL: 120 dB peak
  • Coverage: Vertical 7°, Horizontal 140°
  • Power Handling: 300 W
  • Nominal Impedance: 8 Ω - 32 Ω
  • Connectors: 2x Euroblock 2,5/ 2-ST-5,08
  • IP Rating: IP65 for indoor and outdoor use

Performance and Connectivity
The speakers provide true line array characteristics with phase coherence, low distortion, and focused listening. They support modular configurations, allowing multiple units to be connected for extended arrays. The selectable impedance (8Ω – 32Ω) enables up to 8 units to be connected to a single 4Ω amplifier output channel, eliminating the need for 70V lines in distributed systems.

Dimensions and Weight
  • Vyper-KV102 II: 40 x 1000 x 22 mm (1.56 x 39.37 x 0.85 in), Weight: 1.8 kg (3.96 lb)
  • Vyper-KV102R II: 50 x 1010 x 37 mm (1.95 x 39.76 x 1.45 in), Weight: 1.8 kg (3.96 lb)

Additional Notes
These passive loudspeakers require dedicated presets loaded on K-array amplifiers. The product specifications are subject to change as new materials and designs are introduced.
See more

Catalog excerpts

Vyper-KV102 II-1

Vyper-KV102 II Ultra-flat aluminum meter long frameless line array element with 1” drivers Description Vyper-KV102 II and Vyper-KV102R II are ultra-flat passive loudspeakers comprised of sixteen 1” neodymium magnet transducers each, housed in elegant yet sturdy aluminum chassis. The new frameless chassis of the Vyper-KV102 II is perfect for a clean bracketless installation on any flat surface or where in-wall mounting is needed. The sixteen closely-spaced cone drivers provide true line array characteristics: phase coherence, low distortion and focused listening in both the near field and at a distance from the speaker. Two different values of impedance (8Ω – 32Ω) allow to connect up to 8x Vyper-KV102 II loudspeakers at 32Ω impedance to the same 4Ω amplifier output channel, which eliminates the need of 70V lines for wide distributed installed systems where pristine sound, intelligibility and elegance are mandatory. All Vyper-KV102 II components are designed by the K-array R&D department and are custom made under the K-array quality control system. • 16x 1” Neodymium magnet woofers • 120 dBpeak max SPL • Pure Array Technology • 7° vertical dispersion, 140° horizontal coverage • 8Ω – 32Ω selectable load impedance • Visually discreete • Modular capabilities allow the joining of more units for long array • IP65 suitable for indoors and outdoors installations with included IP accessory • Aluminum chassis • Available in black, white and custom RAL color • 24K Gold, Polished and Brushed premium finishes available •20221212• Vyper-KV102R II Ultra-flat aluminum meter long flush

 Open the catalog to page 1
Vyper-KV102 II-2

Power Handling Nominal Impedance Handling & Finishes Black, White, Custom RAL Dimensions (WxHxD) With dedicated preset. Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m. Notes: Passive loudspeakers require dedicated presets loaded onboard K-array amplifiers. New materials and designs are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalog. 16x 1” Neodymium magnet woofers Passive line array loudspeaker Technical Specificati

 Open the catalog to page 2

All K-array catalogs and technical brochures

  1. Rumble-KU26

    2  Pages

  2. Rumble-KU44

    2  Pages

  3. Firenze-KS7PI

    2  Pages

  4. KS8

    2  Pages

  5. Firenze-KS7

    2  Pages

  6. KH8

    2  Pages

  7. Firenze-KH7PI

    2  Pages

  8. KH7

    2  Pages

  9. Mugello-KH5PI

    2  Pages

  10. Mugello-KH3PI

    2  Pages

  11. Mugello-KH2PI

    2  Pages

  12. Domino-KF212

    2  Pages

  13. Domino-KF210

    2  Pages

  14. Domino-KFC26

    2  Pages

  15. Domino-KF26

    2  Pages

  16. Kayman-KY102

    2  Pages

  17. Kayman-KY52

    2  Pages

  18. Python-KP52I

    2  Pages

  19. Kobra-KK52 I

    2  Pages

  20. Vyper-KV25

    2  Pages

  21. Vyper-KV52 II

    3  Pages

  22. Vyper-KV25 II

    2  Pages

  23. Lyzard-KZ14RI

    2  Pages

  24. Lyzard-KZ1RI

    2  Pages

  25. Lyzard-KZ14I

    2  Pages

  26. Kobra-KK102 I

    2  Pages

  27. Lyzard-KZ1I

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.