video corpo

GIGA X3c
60Pages

{{requestButtons}}

Catalog excerpts

GIGA X3c - 1

GIGA X3c Professional Instructions for Use E K Original instructions for use Before using the machine read the instructions for use.

Open the catalog to page 1
GIGA X3c - 3

8 Transport and environmentally friendly disposal 52 11 JURA contact details / Legal information 60 Symbol description Warnings J WARNING Always take note of any information marked with the words CAUTION or J CAUTION WARNING and a warning sign. The signal word WARNING draws your attention to potential serious injury, and the signal word CAUTION to potential minor injury. CAUTION CAUTION draws your attention to potential damage to the machine. Symbols used ► Prompt to take action. This symbol means that you are being prompted to perform some action. E Information and tips...

Open the catalog to page 3
GIGA X3c - 4

Control elements 1 Bean container with aroma preservation cover 2 Water tank cover 3 Water tank 4 Power switch and plug-in mains cable (back of the machine) 5 Coffee grounds container 6 Drip tray 8 Filler funnel for ground coffee 9 Ventilation slats 10 Storage compartment cover 11 Measuring spoon for ground coffee 12 Height- and width-adjustable dual spout 13 Splash guard 14 Height-adjustable hot-water spout

Open the catalog to page 4
GIGA X3c - 5

Control elements 3 P P button (programming) Front 4 Display 5 Multi-function buttons (button function depends on what is shown in the display) Back of the machine 1 Service cover 3 Sliding catch (open by pressing with your finger) 4 Service socket (underneath cover)

Open the catalog to page 5
GIGA X3c - 6

Important information Proper use This machine is intended for use by specialist or trained staff in businesses, light industry and agricultural facilities or for commercial use by nonprofessionals. It should only be used for coffee preparation and to heat milk and water. Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. Before using the machine read these instructions for use thoroughly and completely and comply with the instructions they contain. A warranty service is not applicable for...

Open the catalog to page 6
GIGA X3c - 7

Important information ■ Make sure that the GIGA and the mains cable are not located close to hot surfaces. ■ Be careful to ensure that the mains cable is not trapped and does not rub against sharp edges. ■ Never open and repair the machine yourself. Do not modify the machine in any way that is not described in these instructions for use. The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be carried out by authorised JURA service centres, using original spare parts and accessories. ■ To completely and safely disconnect the machine from...

Open the catalog to page 7
GIGA X3c - 8

Important information ■ Never allow the mains cable to loosely hang down. The mains cable could pose a tripping hazard or become damaged. ■ Protect the GIGA from environmental influences such as rain, frost and direct sunlight. ■ Do not immerse the GIGA, mains cable or connections in water. ■ Do not put the GIGA or any individual parts in the dishwasher. ■ Switch your GIGA off at the power switch before any cleaning operation. Always wipe the GIGA with a damp cloth rather than a wet one, and protect it from prolonged exposure to water splash. ■The GIGA is not suitable for installation on...

Open the catalog to page 8
GIGA X3c - 9

Important information ■ Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely. Children must be able to recognise and understand the potential dangers arising from incorrect use. People, including children, who ■ do not have the physical, sensory or mental capabilities to use the machine safely or ■ are inexperienced or lack knowledge in how to use the machine safely must be supervised by a responsible person when using it, or must be instructed in how to use it correctly. Safety when handling the CLARIS filter...

Open the catalog to page 9
GIGA X3c - 10

1 Preparing and using for the first time JURA on the Internet Visit us on the Internet. On the JURA website (www.jura.com) you will find interesting and up-to-date information on your GIGA and on every aspect of coffee. A few preparations are necessary before the JURA service technician can set up your GIGA in your home. The following preparations must be carried out by a professionally qualified person: ■ The mains connection for the GIGA must be protected by a residual current device (RCD). ■ There must be a power switch to disconnect the power supply to the GIGA. ■ The permanent water...

Open the catalog to page 10
GIGA X3c - 11

1 Preparing and using for the first time ► Remove any dirt or foreign objects from inside the bean container. ► Fill the bean container with coffee beans and close the aroma preservation cover. i Before the machine is used for the first time, the permanent water connection must be installed by a JURA service technician. During first-time use, you can choose between the ‘Quick installation’ and the ‘standard installation’ (‘Programming’): ■ ‘Quick installation’: After setting the time and date, your GIGA is ready for use. ■ ‘Standard installation’ (‘Programming’): Here, you can also choose...

Open the catalog to page 11
GIGA X3c - 12

1 Preparing and using for the first time i To display more languages, press the ‘Next’ button (bottom right). Quick installation Standard installation ► Press the button that corresponds to the language you want, e.g. ‘English’. ‘Saved’ appears briefly on the display to confirm the setting. ‘First-time use’ i Now choose between ‘Quick installation’ and ‘standard installation’ (‘Programming’). ► Press the ‘Quick installation’ button. ‘Time’ ► Press the ‘+’ or ‘-’ button to set the hours. ► Press the ‘Save’ button. ► Press the ‘+’ or ‘-’ button to set the minutes. ► Press the ‘Save’...

Open the catalog to page 12
GIGA X3c - 13

1 Preparing and using for the first time ► Press the ‘+’ or ‘-’ button to set the minutes. ► Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Date’ ► Press the ‘+’ or ‘-’ button to set the year. ► Press the ‘Save’ button. ► Press the ‘+’ or ‘-’ button to set the month. ► Press the ‘Save’ button. ► Press the ‘+’ or ‘-’ button to set the day. ► Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Use filter’ i Now choose whether you operate your GIGA with or without the CLARIS filter cartridge. ► Press the ‘Active’ button. ► Press the ‘Save’ button. ‘Filter’ /...

Open the catalog to page 13

All JURA catalogs and technical brochures

  1. MANUAL_JOE_IOS

    14 Pages

  2. ENA 8

    31 Pages

  3. E8/E80

    44 Pages

  4. S8/S80

    48 Pages

  5. Z6

    52 Pages

  6. X8

    48 Pages

  7. X6

    2 Pages

  8. ENA Micro 90

    29 Pages

  9. J6/J600

    48 Pages

  10. Z8

    52 Pages

Archived catalogs