Application System INDUSTRY Application System INDUSTRY is the heavy duty underfloor heating solution from JUPITER suitable for a wide range of industrial applications. As is commonly known, underfloor heating radiates heat from the floor up and is perfect for use in large, open plan buildings by keeping the immediate area warm where the workforce operate. Savings with underfloor heating can be up to 30% over traditional high level warm air systems, not only by using less energy but by dramatically reducing maintenance costs. Temperature profile The difference in temperature profile between an underfloor heating system and traditional high level warm air system is clear to see. The congregation of warm air just below the ceiling is demonstrated in this diagram. The advantages Reduced energy costs Space saving Lower initial capital outlay Meets minimum floor temperature requirements (18° ) Ideal temperature profile Lower temperature water supply (i.e. heat pump) Completely maintenance free No dust created – no major warm air circulation Installation JUPITER System INDUSTRY is integrated within the concrete floor slab. The various options are: ● Concrete slab reinforced with lower and upper steel mesh reinforcement ● Pre-stressed concrete with mesh reinforcement ● Steel fibre concrete without mesh reinforcement ● Vacuum concrete (steel, pre-stressed or steel fibre in conjunction with specific vacuum process) If insulation is to be incorporated beneath the slab, a product with high compressive strength and moisture resistance should be used. i.e. XPS or Foamglass Typically the mesh reinforcement is used to fix the underfloor heating pipe work. Using 3 cable ties per linear metre the pipe is fixed to the lower of the two steel meshes. Pipe work within slabs without steel reinforcing mesh can be fixed down using traditional pipe clip rail. Pipe dimension JUPITER System INDUSTRY is based on the proven 20 x 2.25mm multi layer pipe PERT aluminium core pipe. JUPITER Heating System Ltd Chobham Surrey GU24 8DJ T +44 (0) 1276 859 066 F +44 (0) 1276 856 894 www.jupiterunderfloorheating.com

As a rule the pipe layout is fixed to the lower steel reinforcement mesh, so that the drilling depth (for the fixing of machinery or storage systems) does not come in contact with the pipe work. Slab Thickness Distance: Upper mesh to top of slab Mesh Type Application Max. static Load /m² Max. moving load with = axle load 150mm Q131 Single layer 80 mm Workshops and vehicle showrooms (limited to cars) 30 kN/1,5t 12 kN/1,2t 150mm Q131 Double layer 80 mm Workshops and vehicle showrooms (limited to 7.5t) 50 kN/5,0t 16 kN/1,6t 180mm Q131 Double layer 110 mm Warehouses with Fork lifts & trucks to 5t...