30mm high density EPS system Low profile EPS radiant heating panel system JUPITER IDEAL EPS system is a truly engineered underfloor heating system manufactured from injection moulded EPS 035 DEO 240 kPa expanded polystyrene. The system is 30mm thick providing an R value of 0,86 and is designed to accept the 16mm JUPITER multilayer PE/RT pipe. The main system consists of two panel types. Central zone panels offer pipe centres of 250mm and Edge Zone panels 125mm centres. Both of these panel types are manufactured with an integrated 0.5mm aluminium diffuser plates to optimise heat output and ensure even heat where possible. The channel within the aluminium diffuser plates is omega formed to provide better encapsulation the of pipe. Central Zone panels are made up of 8 segments which can be easily snapped to size along the break points. Similarly the Edge Zone panels are made up of 16 individual segments that can be snapped off. Both panel types measure 1000mm x 500mm. Central Zone Panel Edge Zone Panel Panels to return the pipe and the end of a run are supplied with or without aluminium diffuser plates and are available for both 250mm and 125mm centre systems. Unheated areas such as under kitchen cupboards, fitted furniture, baths and shower trays can be filled with similar, 30mm thick blank EPS insulation panels. Tailored pipe runs can be formed within these panels using a hot wire cutter if required. Header Return Panels The JUPITER multi layer system pipe is manufactured in Germany to DIN 16836, carries a 10 year warranty and has a minimum design life of 50 years. 1 Polyethylene RT 2 Adhesive 3 Aluminium 4 Adhesive 5 Polyethylene RT JUPITER Heating Systems Limited The Barns, Pennypot Lane, Chobham, Surrey, GU24 8DJ T: 01276 859 066 www.jupiterunderfloorheating.com