1. Catalogs
  2. JUNO
  3. JUNOLITE FAÇADES

JUNOLITE FAÇADES

JUNOLITE FAÇADES

JUNOLITE FAÇADES

Product catalog summary
Description: JUNOLITE Façades is a self-cleaning paint designed for façades, utilizing Pliolite resins and organic solvents. It is resistant to weathering, waterproof, and can withstand marine environments and acid rain. Suitable for both indoor and outdoor use, it is ideal for protecting and decorating façades, medians, and concrete surfaces requiring high quality.
Characteristics:
  • Finish: Matt
  • Colour: White, with other colours available for orders over 100 Kg.
  • Density: 1.47 +/-0.05 S/FR1001
  • Drying Time: Touch dry in 3 hours; second coat after a minimum of 24 hours, with no maximum limit.
  • Diluent: D-16 or D-40
  • Solids in Volume: 35+/-2% (Theoretical)
  • Coverage: 5 m2/Lt/coat
  • Flash Point: Flammable (21º - 55º C)
  • VOC Content: Max 450 g/l
Application Instructions:
  • Can be applied using a brush, roller, or spray gun with pneumatic equipment.
  • Stir contents thoroughly before use.
  • Apply on dry, clean, and consolidated surfaces; can be diluted with up to 4% D-16 solvent.
  • Avoid applying on overly heated substrates.
  • Can be applied over old paints in good condition, but prior testing is recommended.
  • For surfaces with fungal, mould, or algae contamination, clean with water and bleach, rinse, and allow to dry.
Dyeing: Can be tinted with Universal Colorant, not exceeding 3% of colorant.
Packaging: Available in lithographed metal containers of 15 litres.
Disclaimer: Technical instructions and advice are provided in good faith and should be verified by the customer for suitability. Liability is limited to the value of the goods supplied.
See more

Catalog excerpts

JUNOLITE FAÇADES-1

PINTURAS JUNO DATA SHEET JUNOLITE FAÇADES DESCRIPTION Self-cleaning paint for façades. Based on Pliolite resins and organic solvents. Weathering, waterproof, marine environment and acid rain resistant. USAGE: INDOOR - OUTDOOR Use to protect and decorate façades, medians and concrete surfaces in general, where the highest quality is required. Matt White Other colours made to order. Minimum 100 Kg. 1.47 +/-0.05 S/FR1001 To the touch: 3 hours Second coat: Minimum 24 hours Maximum: Indefinite D-16 or D-40 (35+/-2)% Theoretical 5 m2 / Lt / coat Flammable (21º - 55º C) Max 450 g/l APPLICATION INSTRUCTIONS - Brush, roller or spray gun. - Pneumatic equipment. - Stir the recipient contents thoroughly until evenly mixed. - Apply directly onto dry, clean and consolidated surfaces; it can be diluted with a maximum 4% D-16 solvent content in volume. - Do not apply on overly heated substrates - When old paints are in good condition, it can be applied on top of them, but a prior test is recommended. - In case of fungal, mould or algae contamination, surfaces must be cleaned with water and bleach, and then rinsed with water. Allow to dry. PINTURAS JUNO Bº Saconi, 10-48.950 Erandio (Vizcaya)-Tel. 94-467 00 62-Fax 94-467 58 32 INTERNET:www.juno.es - E-MAIL: infowe

 Open the catalog to page 1
JUNOLITE FAÇADES-2

DYING With Universal Colorant, not exceeding 3% of colorant. PACKAGING Lithographed metal container. Size: 15 litres. N.B.: Our technical instructions and advice, whether oral, in writing or through tests are given in good faith and to the best of our knowledge. However, it must only be construed as an indication WITHOUT LIABILITY even in regard to possible third -party industrial property rights, and this does not exempt the customer from testing the supplied products in order to verify their suitability for the procedures and purposes intended. The application, use and processing of the products...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.