JUNODUR Varnish Satin
2Pages

PINTURAS JUNO DATA SHEET JUNODUR SATIN VARNISH DESCRIPTION Single-component synthetic polyurethane -resin based varnish. It provides a satin, resistant and soft to the touch finish for any kind of wood. USAGE: INDOOR It is specifically designed for restoring and varnishing wood furniture. Satin Colourless Min 70” S/FR1002 0.87 +/-0.05 S/FR1001 To the touch: 4 hours Second coat: Minimum 24 hours Maximum 72 hours. D-16 or White Spirit. Flammable (21º - 55º C) 10-12 m2 / Lt / coat Max 500 g/l SURFACE PREPARATION Apply on perfectly clean and sanded down wood surfaces. Treating new surfaces with Base Protector is recommended. After 24 hours, apply one or two coats of Junodur Varnish diluted with 5% D-16, spreading the product evenly and sanding down between coats. For already varnished surfaces, and if the varnish is in good condition, it is necessary to degrease the surface, sanding down lightly and apply one or two coats of varnish directly or diluted with 5% D-16 Diluent, sanding down between coats. If the varnish is in poor condition, remove it and clean the surface, and finish off with two coats of Junodur Varnish, diluted with 5% of D-16, and sanding down between coats. PINTURAS JUNO Bº Saconi, 10-48.950 Erandio (Vizcaya)-Tel. 94-467 00 62-Fax 94-467 58 32 INTERNET:www.juno.es - E-MAIL: infoweb@jun

APPLICATION INSTRUCTIONS Brush: Directly or diluted with 5 % D-16. Spray gun: Diluted with 15-20% of D-16. CLEANING D-16 Solvent or Universal Solvent REPAINTING Same product OBSERVATIONS Clean very resinous woods D-50 Solvent prior to application. Stir the recipient contents thoroughly until evenly mi xed. Lithographed metal container. Sizes: 0.750 / 4 and 20 litres . NB: Our technical instructions and advice, whether oral, in writing or through tests are given in good faith and to t he best of our knowledge. However, it must only be construed as an indication WITHOUT LIABILITY even in...