PINTURAS JUNO DATA SHEET INDUSTRIAL DIVISION EPOXYC ENAMEL 2/C CODE: 7700 A two-component Epoxy Polyamide Enamel with excellent gloss and hardness. It provides good covering and is easy to apply. Finishing enamel for Epoxy processes, to protect metal surfaces exposed to the contact with water, grease, acids It is also recommended for painting unpolished concrete floors. Maximum continuous temperature . Min: 24 hours Maximum 72 hours. METAL SURFACES Must be free of grease, rust and calamine, and subsequently primed with Epoxy Primer 2/C. Apply Epoxy Enamel CONCRETE SURFACES. Apply two coats of Epoxy Enamel 2/C; the first coat diluted with 20-30% D-90 Diluent in volume, followed by a second coat undiluted or diluted at 5 %, 24 hours later.

The second coat application must not be delayed beyond 48 hours. To avoid any problems regarding the coats adherence and achieve an optimal bonding of the paint film to the concrete surface, the surface texture must be rough and free of stains from grease, rubber, curing agents, lime milk and any other foreign Try to remove grease and rubbers stain using solvents or detergents, and follow by rinsing with water. Sandblast if Lime milk and curing agents must be removed by sandblasting, followed by vacuum -cleaning dust. This achieves a roughly textured surface free from foreign particles. A good...