AQUAIR
2Pages

Catalog excerpts

AQUAiR Technical Data Water to Air Space Heater. Models Aquair S-10 Aquair S-16 Aquair S-20 Features Air circulation fan with EC technology Air filter PCB control board Hot water return to heat source Hot water flow from heat source Heat exchanger Can fully utilise the existing warm air ducting Features Aquair is a water-to air heat exchange unit with a heat output of 10, 16 and 20kW (assuming a hot water supply at 80°C is available). It is supplied as an upflow and downflow unit. Modulating control is incorporated. A wire mesh filter is fitted as standard, with a Cleanflow electronic air cleaner being available as an option. The unit requires a supply of hot water at a minimum temperature of 80ºC. Water connections are, top left or right handed through knockouts in the sides of the cabinet. Air is drawn in through the air filter or air cleaner (if fitted) and the heat exchanger by a centrifugal fan, and is discharged through the opposite end of the unit. An external summer air circulation switch (not provided) provides the facility to supply unheated air to the air outlets during warm weather. An external timer (not provided) will be required if it is necessary to set the periods of operation.

Open the catalog to page 1

Aquair S-10 Internal View Air filter Air circulation fan with EC Technology Hot Water flow from heat source Heat exchanger Hot water return to heat source Flow sensor Technical Data ITEM Nominal Rated Output Water Supply Temperature Water Return Temperature Water Flow Rate Water Connections Maximum Water Pressure Electrical Supply In the interest of continuous development Johnson & Starley reserve the right to change specification without prior notice. Johnson & Starley Ltd. Rhosili Road, Brackmills, Northampton NN4 7LZ Telephone: 01604 762881 Fax 01604 767408 Maximum Power Consumption

Open the catalog to page 2