John L. Lord & Son Ltd Ainsworth Road, Bury Lancashire, BL8 2RS SPECIALIST FLOORING Technical Data Sheet Product Description Epigard SL AntiStatic is a specially formulated self-levelling static dissipative resin floor screed that resists the build up of static charges in accordance with BS EN 1081:1998. This system is suited to environments where static electricity must be controlled. Epigard SL AntiStatic has a smooth gloss finish and is laid between 2mm and 3mm thick depending upon in-service requirements. Physical Properties Complies with BS 8204-6 / FeRFA Type 5, System Make-Up: Static dissipative Colour stable Easy to clean, gloss finish Non tainting Chemical resistant Highly durable, wear and impact resistant 1 application Epigard SL AntiStatic None Optional Variations: • • Copper conductor strip affixed to substrate 1 coat Epigard SL AntiStatic primer (and where necessary 1 coat Epigard Fastrac pre-primer) Sealer Coat(s): System Details: Finish: Wide colour range plus bespoke colours available Technical Data John L. Lord & Son Ltd is an ISO 9001:2008 accredited company and all products are manufactured strictly to ISO quality standards. Performance Data Chemical Resistance Resistant to a wide range of acids, alkalis, greases, fuels, salt solutions and some solvents. For full details consult the John Lord Technical Dept. Curing Time Floor can go into service after the following minimum cure periods at 18ºC and above: Compressive Strength: Flexural Strength: Bond Strength to Concrete: Exceeds cohesive strength @ 30N/mm2 Coeff. Thermal Expansion (ASTM C531): Temperature Resistance: The product should be kept in its original unopened container until use. Occasional spillages of up to 70ºC at 2.5mm+ thickness The product should be stored in weather tight conditions at temperatures between 10ºC and 25ºC, avoiding direct sunlight. Under these conditions this product has a shelf life of up to 12 months. Flash Steam Cleanable: Light Traffic: Heavy Traffic: Full Chemical Cure: Water Permeability: Shelf Life and Storage All figures are measured and expressed under laboratory conditions: Actual performance may vary from the above values depending upon site conditions. © John L. Lord & Son Ltd; EPIGARD SL AntiStatic / 1 of 2 Other Products The following products from the John Lord Group are recommended for use with Epigard SL AntiStatic: • Epiga

Technical Data Sheet Application Information John Lord recommends that all products are installed by their own Contracts Department who provide a professional service with experienced Project Management supervision and skilled, trained and NVQ/CSCS approved employees. Suitable Applications • • • • • • • • Electronics Manufacturing, Assembly and Testing Pharmaceutical Production Facilities Laboratories and Clean Rooms Hospitals Ordnance Facilities Nuclear Industry Aerospace Industry Specialist Dry Processing Substrate Suitability and Preparation A separate technical data sheet is available on...