NEWTON WATERPROOFING SYSTEMS
42Pages

{{requestButtons}}

Catalog excerpts

NEWTON WATERPROOFING SYSTEMS - 1

© John Newton & Co. Ltd. Issue Date: February 2012 Protecting buildings, since 1848 NEWTON WATERPROOFING SYSTEMS Product Catalogue 100 - Cementitious Products 200 - Deck And Roofing 300 - Waterproofing of Concrete Structures 400 - External Waterproofing 500 - Cavity Drain Waterproofing 600 - Flooring Membranes 700 - Liquid Applied Floor Coatings 800 - Damp Proofing 900 - Liquid Primers & Sealers FlexProof Construction Joint Waterproofing Diathonite Insulating Plaster Sump and Pump Multi-Use

Open the catalog to page 1
NEWTON WATERPROOFING SYSTEMS - 2

PRODUCT CATALOGUE SYSTEM 100 - CEMENTITIOUS PRODUCTS Newton System 100 is a comprehensive portfolio of cementitious products which have been introduced into our structural waterproofing range to complement and complete our basement waterproofing designs in areas where the Newton System 500 would not be suitable. Such details include - lift shafts, flat soffits and externally to retained slabs and ring beams. SYSTEM 300 - WATERPROOFING OF CONCRETE STRUCTURES Newton System 300 is a range of products, some unique to John Newton, used to waterproof construction joints and movement joints of...

Open the catalog to page 2
NEWTON WATERPROOFING SYSTEMS - 3

PRODUCT CATALOGUE SYSTEM 500 - CAVITY DRAIN WATERPROOFING SYSTEM 800 - DAMP PROOFING The professional’s “waterproofing system of choice”, Newton System 500 is an internally applied waterproofing system based upon our range of cavity drain membranes, drainage conduits and sophisticated pumping and control systems. Unlike conventional ‘tanking’, Newton System 500 is not attempting the almost impossible and trying to hold water back, but places designed maintainable depressurisation voids at known weaknesses in the structure so that ingressing water is simply captured and diverted out of the...

Open the catalog to page 3
NEWTON WATERPROOFING SYSTEMS - 4

PRODUCT CATALOGUE NEWTON FLEXPROOF - CONSTRUCTION JOINT WATERPROOFING Newton FlexProof-X1 forms an elastomeric polymer membrane that is rainproof in minutes and capable of handling severe building movements and deformations. FlexProof-X1 is quite unique with amazing characteristics allowing it to be used without a primer, without mixing and in weather conditions that preclude the use of alternatives. Newton FlexProof-X1 (FP1), Page 28 Construction Joint Waterproofing NEWTON DIATHONITE - INSULATING PLASTER Newton Diathonite is a premixed plaster, fibrereinforced with cork (granular 0-3 mm),...

Open the catalog to page 4
NEWTON WATERPROOFING SYSTEMS - 5

SYSTEM OVERVIEW NEWTON SYSTEM 100 Cementitious Products NEWTON SYSTEM 100 - CEMENTITIOUS PRODUCTS System Overview Newton System 100 is a comprehensive portfolio of Type A (BS8102:2009) cementitious waterproofing products for the sealing of leaks and the waterproofing of lift shafts, flat soffits, walls and slabs. System 100 products can be used on their own, or in conjunction with System 200, System 300, System 400 and System 500 waterproofing products, and with System 700 (Liquid Flooring Membrane) and System 800 (damp-proofing) products also. NEWTON 101F (CW 101) Cementitious Flexible...

Open the catalog to page 5
NEWTON WATERPROOFING SYSTEMS - 6

SYSTEM OVERVIEW NEWTON SYSTEM 100 Cementitious Products NEWTON 102 WATERPLUG (CW 102) Fast Setting Polymer Compound To Seal Leaks Newton 102 WaterPlug is a fast setting, polymer compound that instantly stops running water or seepage through masonry or concrete substrates. It becomes harder and more resistant when subjected to constant water pressure. Newton 102 WaterPlug is a non-shrink material that expands slightly and sets in approximate 2 minutes. Available in 5kg, 10kg or 25kg tubs. Typical Applications: • • • • • • • Leak sealing prior to tanking with Newton 101F Sealing of leaks at...

Open the catalog to page 6
NEWTON WATERPROOFING SYSTEMS - 7

SYSTEM OVERVIEW NEWTON SYSTEM 100 Cementitious Products NEWTON 107 QUICKFILLET (CW 107) Fast Setting Pre-Mix Mortar For Angle Fillets Newton 107 QuickFillet is a fast setting and fast curing mortar with a rapid strength gain used to quickly form 45° angled fillets at junctions between walls and floors or soffits. Newton 107 QuickFillet should be used to form fillets for use with Newton 101F cementitious slurry and can be used to reinforce internal corners ready for Newton liquid applied membranes such as 201 RubberFlex, 205 ColorSeal or 702 EcoSeal. Newton 107 Quick Fillet can also be used...

Open the catalog to page 7
NEWTON WATERPROOFING SYSTEMS - 8

SYSTEM OVERVIEW NEWTON SYSTEM 200 Deck & Roofing NEWTON SYSTEM 200 - DECK AND ROOFING System Overview Newton System 200 is a complete range of externally applied liquid elastomeric membranes for the structural waterproofing of podium decks, balconies and terraces, flat and inverted roofs, car parks, swimming pools, green or turf roofs and reservoirs. This new portfolio of seamless and robust liquid membranes gives specifiers and specialist waterproofing contractors a quick and cost effective solution to protect external areas from water ingress. NEWTON RUBBERFLEX SYSTEM Podium Deck and Flat...

Open the catalog to page 8
NEWTON WATERPROOFING SYSTEMS - 9

SYSTEM OVERVIEW NEWTON SYSTEM 200 Deck & Roofing NEWTON 204 THINNER (RF 204) Polyurethane Thinning & Cleaning Agent Newton 204 Thinner is a slow acting blended solvent for use with Newton RubberFlex and Newton 205 ColorSeal. Newton 204 Thinner is used to dilute the polyurethane membrane and is especially useful when Newton RubberFlex is applied by airless spray. Newton 204 Thinner is also used as a cleaning medium for tools and equipment used during the application of the membrane and it can also be used as a barrier against humidity when having to store product already opened. Newton 204...

Open the catalog to page 9
NEWTON WATERPROOFING SYSTEMS - 10

SYSTEM OVERVIEW NEWTON SYSTEM 200 Deck & Roofing NEWTON 207 DECKDRAIN (M30) Drainage Membrane for Decks and Flat Roofs Newton 207 DeckDrain is a double cuspated, deck and flat roof drainage membrane, that incorporates a non-woven geotextile filter layer, bonded to a water impermeable HDPE (High Density Polyethylene) core. The double cuspated design provides two layers of drainage; allowing for primary drainage through the geotextile filter, as well as secondary drainage between the underside of 207 DeckDrain and the primary waterproofing layer. The lower drainage layer eliminates the risk...

Open the catalog to page 10
NEWTON WATERPROOFING SYSTEMS - 11

SYSTEM OVERVIEW NEWTON SYSTEM 200 Deck & Roofing NEWTON 210 FLEXPROOF-NV (FP4) Waterproofing of Podium Decks and Flat Roofs Newton 210 FlexProof-NV is a highly advanced single component liquid waterproofing material, which forms an elastomeric polymer membrane capable of handling severe building movements and deformations. Movement joints to Decks and Flat Roofs can also be waterproofed with Newton 201 FlexProof-NV whether the main waterproofing membrane is FlexProof-NV or Newton RubberFlex. Newton 210 FlexProof-NV has characteristics that allow it to be used without a primer, without...

Open the catalog to page 11

All John Newton & Co Ltd catalogs and technical brochures