Technical specifications ( patented product ) Technical Specifications The No-Ha 2.0 Slide is a door handle that recedes into the door panel and can be used on all sliding doors that slide into the wall or in front of it. The handle has the same look as the No-Ha 2.0 for revolving doors. The No-Ha cover plate is not part of the mechanism so that it can be made to match the finish of the door panel. The No-Ha cover plate is available as an accessory in MDF and in brushed stainless steel. The milling in the door panel is the same as with the No-Ha 2.0 revolving doors. An extra piece must be fitted on the top of sliding doors that slide into the wall so that the door can be drawn out of the wall. Measurements: - Opening: 87mm x 45mm - Cover plate: 85.5mm x 43.5mm - Note: The cover plate is made to match the surface finish of the door panel and is NOT part of the door handle mechanism. Handle for sliding doors Handle 2 sides for Slidingdoors 38 mm + Handle 1 side for sliding doors :NS 105 45 For cupboards and drawers see No-Ha single B- 3545 Halen – Belgiën tel: +32 (0)489 511 741 - [email protected] –