*myarchiexpo

Catalogs
JNF
2015 HINGES & PIVOTS

2015 HINGES & PIVOTS

Product catalog summary

Regulation Overview: Regulation (EU) No 305/2011, effective from July 1, 2013, standardizes the marketing conditions for construction products. Manufacturers must create a declaration of performance (DoP) for products under a harmonized standard or European Technical Assessment. CE marking is permitted only if the DoP is issued by the manufacturer, especially for single-axis hinges used in fire, smoke, and emergency exit doors, following System 1 of assessment.

Harmonized Standards: EN1935 is the referenced harmonized standard for hinges.

Technical Information on Hinges: Fireproof hinges require intumescent kits compliant with EN 1634. These kits consist of expanding foam with a self-adhesive backing, 1mm thick.

Hinge Load Calculation: Hinges are designed to handle specific loads based on door weight, dimensions, and usage frequency. It is recommended to use three hinges per door for safety, with a fourth hinge considered for certain usage types.

Door and Hinge Specifications: The document provides a method for calculating the number of hinges needed based on door dimensions and usage, including a step-by-step guide to determine door weight and necessary adjustments.

Hinge Selection: Hinges are classified according to EN 1935:2002. Selection is based on theoretical weight calculations, with recommendations for additional hinges if necessary.

Application Guidelines: Guidelines for classifying hinges based on door opening direction are included, with examples for right and left-hand doors.

Specifications:

Details on various hinge types, including 3D adjustable invisible hinges, safety hinges, and hinges with ball bearings.
Materials include aluminum, stainless steel, and nylon alloy, offering high strength, low friction, and self-lubricating properties.
Hinges allow adjustments in height, depth, and width, with specific tolerances.
Maximum load capacities vary, with some hinges supporting up to 120 Kg.
Designed for both interior and exterior doors, with some models suitable for fireproof applications.

Procedures:

Installation requires precise alignment, facilitated by design allowing mechanization of doors and frames.
Hinges can be installed on doors with a minimum thickness of 16mm, with some models requiring at least 40mm.
Diagrams for necessary cutouts for frame and door installation are included.

Standards:

Hinges comply with EN1935 standards, suitable for various applications, including fireproof requirements.
Specific models are registered under international design registries.

Recommendations:

Use hinges with self-lubricating washers for reduced maintenance and increased durability.
For heavy-duty applications, select hinges with higher load capacities and fireproof capabilities.
Ensure proper installation by following provided diagrams and specifications for cutouts and alignments.

Key Data from Tables and Diagrams:

Load capacities and dimensions for each hinge model indicate suitability for different door sizes and weights.
Diagrams illustrate necessary cutouts for installation, ensuring proper fit and function.

Overview: The document provides technical specifications and features of various types of spring hinges and pivots designed for single or double action doors, primarily made from stainless steel (EN 1.4301) for durability and ease of use.

Spring Hinges:

Designed for single or double action doors with ball bearings for smooth operation.
Low maintenance with an adjustable torsion spring system.
Made from stainless steel (EN 1.4301) with a satin finish.
Available in different models with varying load capacities.
Features include adjustable power and a new torsion spring system.

Pivots:

Complete sets available for single or double action doors with a 3D adjustment system.
Components made entirely of stainless steel, supporting a maximum door width of 1500mm and weight up to 500Kg.
Includes bearings in both upper and lower pivots for enhanced stability and smooth operation.
Internationally patented design with reinforced fixing bases for strong attachment.
Features a needle bearing on the upper shaft for perfect door rotation and an O-ring to seal the bearing housing.

Additional Features:

Adjustable spring closing force and speed adjustment valves for customized door operation.
Drilling options available for passing electric cables through the door.
High precision tapered roller bearings for smooth and quiet functionality.
Stainless steel covers allow access for door adjustments without removal.

Conclusion: The document outlines a range of high-quality, stainless steel hinges and pivots designed for robust and flexible door operations, suitable for both residential and commercial applications.

Catalog excerpts

DOBRADIÇAS & PIVOTS / HINGES & PIVOTS / BISAGRAS & PIVOTES.

Open the catalog to page 2

Dobradicas & Pivots / Hinges & Pivots / Bisagras & Pivotes Informacao t£cnka / Technical information / INFORMACAO TECNICA / TECHNICAL INFORMATION / INFORMACION TECNICA Support ng test reports far this certificBle of conformity are as Follows- Table A3. Mechanical feet reports S product classification for hinge range from J Newt Fllhes SA Thta Cerffitala h fa the Bscduswe- UM of Initerte-k's dfrri and a provided pursuant It* ths agwnent between InLflrtek and ire CfeWft. inbfwlek s ftjsp&niitiilily. ami hafclny jun lirYiiffcd to Ihe tawirii jndcondilhona of Ihe agreemenl. Inlertak: a&sumes no liability...

Open the catalog to page 3

Informação técnica / Technical information / Información técnica. DECLARAÇÃO DE DESEMPENHO / MARCAÇÃO CE DECLARATION OF PERFORMANCE (DOP) / CE MARKING DECLARACIÓN DE PRESTACIONES / MARCADO CE O Regulamento (UE) n.o 305/2011 entrou em vigor em 1 de Julho de 2013, o qual estabelece condições harmonizadas para a comercialização dos produtos de construção e revoga a Directiva 89/106/CEE. O presente regulamento obriga os fabricantes de produtos de construção a elaborar uma declaração de desempenho quando um produto de construção abrangido por uma norma harmonizada ou conforme com uma Avaliação Técnica...

Open the catalog to page 4

Dobradiças & Pivots / Hinges & Pivots / Bisagras & Pivotes INFORMAÇÃO TÉCNICA / TECHNICAL INFORMATION / INFORMACIÓN TÉCNICA Informação técnica / Technical information / Información técnica.

Open the catalog to page 5

Informação técnica / Technical information / Información técnica. DOBRADIÇA / HINGE / BISAGRA KIT INTUMESCENTE / INTUMESCENT KIT / KIT INTUMESCENTE TIPO DE APLICAÇÃO/ TYPE OF APLICATION/ TIPO DE APLICACIÓN OBRIGATÓRIO / REQUIRED / OBLIGATORIO OBRIGATÓRIO / REQUIRED / OBLIGATORIO OBRIGATÓRIO / REQUIRED / OBLIGATORIO OBRIGATÓRIO / REQUIRED / OBLIGATORIO OPCIONAL / OPTIONAL / OPTIONAL OPCIONAL / OPTIONAL / OPTIONAL OPCIONAL / OPTIONAL / OPTIONAL OPCIONAL / OPTIONAL / OPTIONAL OPCIONAL / OPTIONAL / OPTIONAL OPCIONAL / OPTIONAL / OPTIONAL OPCIONAL / OPTIONAL / OPTIONAL OPCIONAL / OPTIONAL / OPTIONAL...

Open the catalog to page 6

Dobradiças & Pivots / Hinges & Pivots / Bisagras & Pivotes Informação técnica / Technical information / Información técnica. INFORMAÇÃO TÉCNICA / TECHNICAL INFORMATION / INFORMACIÓN TÉCNICA NOS CASOS EM QUE É NECESSÁRIO CLASSIFICAR AS DOBRADIÇAS DE ACORDO COM O SENTIDO DE ABERTURA DA PORTA É ACONSELHÁVEL A CONSULTA DOS ESQUEMAS SEGUINTES. IN CASE THAT IS REQUIRED TO CLASSIFY THE HINGES ACCORDINGLY TO THE WAY TO OPENING THE DOOR IT IS RECOMENDED THE CONSULTATION OF THE FOLLOWING DRAWINGS. EN LOS CASOS DONDE ES NECESARIO CLASIFICAR LOS PERNIOS EL SENTIDO DE APERTURA DE LA PUERTA ES RECOMENDABLE...

Open the catalog to page 7

Informação técnica / Technical information / Información técnica. A) Determinar peso da porta. A) Determine weight of the door. A) Determinar el peso de la puerta. B) Determinar a percentagem de incremento ao peso da porta, caso seja necessário mediante as dimensões da porta e utilização prevista para a mesma (Portas com largura superior a 1 metro ou com aplicação de ferragens complementares). B) Determine the percentage to increase the weight of the door, if necessary by the dimensions of the door and intended use of the same. ( Doors with width bigger then 1 meter or with additional hardware...

Open the catalog to page 8

Dobradiças & Pivots / Hinges & Pivots / Bisagras & Pivotes Informação técnica / Technical information / Información técnica. INFORMAÇÃO TÉCNICA / TECHNICAL INFORMATION / INFORMACIÓN TÉCNICA B2) UTILIZAÇÃO PREVISTA: Instalação mola aérea: + 20 % Instalação mola aérea com paragem: + 75 % Frequência de utilização elevada: + 30 % Frequência de utilização abusiva: + 75 % B2) INTENDED USE: Install door closer: + 20% Install door closer with hold function: + 75% High frequency of use: + 30% Abusive use frequency : + 75% Peso teórico = Peso real + Incrementos Theoretical weight = weight + actual increments...

Open the catalog to page 9

Informação técnica / Technical information / Información técnica. Primeiro dígito / First digit Segundo dígito / Second digit Categoria de utilização/ Ensaio de durabilidade (ciclos) / Use category Endurance test (cycles) Condições Grau Utilizar Grau de utilização Grade em/ Grade Use in Use conditions Ligeira / Light Ligeira / Light Ligeira / Light Média / Medium Ligeira / Light Ligeira / Light Média / Medium Ligeira / Light Ligeira / Light Média / Medium Elevada / Hight Severa / Severe Severa / Severe Severa / Severe Terceiro dígito / Third digit Massa da porta de ensaio / Test door weight Numero...

Open the catalog to page 10

Dobradiças & Pivots / Hinges & Pivots / Bisagras & Pivotes Informação técnica / Technical information / Información técnica. INFORMAÇÃO TÉCNICA / TECHNICAL INFORMATION / INFORMACIÓN TÉCNICA Classificação de utilização: (1º Dígito) User Rating: (1º Digit) Calificación de utilización: (1º Dígito) Grau 1 – Utilização Ligeira Dobradiças para utilização em portas ou janelas de habitações e em edifícios onde exista uma baixa frequência de utilização por utilizadores muito cuidadosos e com os quais exista uma probabilidade muito baixa de ocorrência de acidentes ou de utilização indevida. (Situações...

Open the catalog to page 11

2015 HINGES & PIVOTS

2015 HINGES & PIVOTS

Catalog excerpts

All JNF catalogs and technical brochures

Archived catalogs