video corpo cad

Polyester gratings
2Pages

{{requestButtons}}

Catalog excerpts

Polyester gratings - 1

JK technic - Parc Industriel Sud - ZI Edison Rue Abbé Louis Verdet - 57200 Sarreguemines - France e-mail : jktechnic@jktechnic.fr - Internet : www.jktechnic.com technical data sheet Moulded polyester gratings are made of resin reinforced with fibreglass and they are shaped into panels. They are extremely resistant to corrosion, even when this is due to chemical agents. 30 x 30 mm mesh • Clamps for polyester gratings are made of stainless steel 316, and they are equipped with a U-bolt or with a disk, as well as with a screw and tab set for assembly. • Features and regulations • Self-destroying resin. • M1/F1 classification, in compliance with the regulations NFP 92-501 and NFF 16-101. • Regulations ASTM E84-0 index FSI =<25. • R13 Anti-slip (concave) in compliance with the regulations BGR 181 and DIN 51130. • Bearing in both directions. • Full and siliconized surfaces available. • Steps with siliconized nosing. On demand: - profiled for banisters, - stairs with or without crinoline. Steps with siliconized nosing with or without support. • Resin range • Orthophtalic Resin Colour: light grey (RAL 7040). Type: JK FIB Top (fire retardant) M1/F1. Resistant to a wide range of chemical products. • Isophtalic resin Colour: green (RAL 6010). Type: JK FIB Top Class (fire retardant) M1/F1. Highly resistant to corrosion and to chemical products. • Isophtalic resin Colour: light grey (RAL 7035). Type: JK FIB Top Class (fire retardant) M1/F1. Especially developed for the food industry. • Vinylester resin Colour: orange (RAL 2002). Type: JK FIB Top Corrosion. (fire retardant) M1/F1. Resistant to the strongest chemical aggressions.

Open the catalog to page 1
Polyester gratings - 2

JK technic - Parc Industriel Sud - ZI Edison Rue Abbé Louis Verdet - 57200 Sarreguemines - France e-mail : jktechnic@jktechnic.fr - Internet : www.jktechnic.com UNIFORMLY DISTRIBUTED WEIGHT in daN/m² UNIFORMLY DISTRIBUTED WEIGHT in daN/m² maximum recommended technical data sheet table of load capacity UNIFORMLY DISTRIBUTED WEIGHT in daN/m² UNIFORMLY DISTRIBUTED WEIGHT in daN/m² maximum recommended CONCEPTION-REALISATION : MPRSA - +352 26 92 37 26 - RCS : 2003-22-01-505 - Crédits photo : GraphicObession UNIFORMLY DISTRIBUTED WEIGHT in daN/m² UNIFORMLY DISTRIBUTED WEIGHT in daN/m² maximum...

Open the catalog to page 2

Archived catalogs