video corpo

Mono 156MM

Mono 156MM

Mono 156MM

Product catalog summary
Product Overview:
The document provides technical specifications for monocrystalline solar cells with dimensions of 156mm x 156mm and an efficiency of up to 19.30%. These cells are designed for high performance with a diagonal measurement of 200mm and an average silicon thickness of 180um ± 20um.
Mechanical Specifications:
The solar cells are monocrystalline with a precise format of 156mm x 156mm ± 0.5mm. The cells feature a back surface field made of aluminum and are equipped with 1.4mm silver bus bars and 2.8mm wide silver soldering pads. A blue anti-reflecting coating made of silicon nitride is applied to enhance efficiency.
Electrical Characteristics:
The cells are tested under standard test conditions (STC) of 100W/㎡, 25°C, and AM 1.5. The efficiency ranges from 18.10% to 19.30%, with corresponding nominal power at maximum power point (MPP) ranging from 4.280W to 4.610W. The short circuit current (ISC) varies from 8.194A to 8.540A, while the open circuit voltage (VOC) ranges from 0.626V to 0.638V. The maximum power voltage (VPM) and maximum power current (IPM) are also detailed, showing slight variations across different efficiency levels.
Performance Metrics:
The document includes a table of efficiency percentages and corresponding electrical outputs, highlighting the relationship between efficiency and power output. The highest efficiency recorded is 19.30%, with a nominal power of 4.610W.
See more

Catalog excerpts

Mono 156MM-1

MONOCRYSTALLINE CELLS, 156 X 156 MM, EFFICIENCY UP TO 19.30% • Up to 19.30% efficiency one of the highest performing mono crystalline cells on the market • Three bus bars boosts current collection over the entire cell area, leading to higher fill factors and MORE POWER. • Blue anti-reflecting coating allows more sunlight be captured and converted to electricity. • Finer, closer fingers improves charge collection while minimizing shading • Excellent performance due to outstanding low-light behavior • Lower light-induced degradation leads to greater power output over the entire module lifetime • All solar cells are tightly classified to optimize output of module • Strict quality control procedure and good raw materials ensures superior electrical long-term stability • Premium appearance results in a highly uniform and aesthetically appealing module IV CURVE I Relative Spectral Response VbttagBM wavelength(rm)

 Open the catalog to page 1
Mono 156MM-2

Mono 156MM MONOCRYSTALLINE CELLS, 156 X 156 MM, EFFICIENCY UP TO 19.30 % MECHANICAL SPECIFICATION TECHNICAL DRAWING Monocrystalline solar cell 1.4mm bus bars(silver), blue anti-reflecting coating(silicon nitride) 2.8mm wide soldering pads(silver), back surface field(aluminum) ELECTRICAL CHARACTERISTICS Test condition: STC 100W/ Nominal Power Open Circuit Voltage VOC [V] Short Circuit Current ISC [A]

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.