video corpo

Mono 125MM

Mono 125MM

Mono 125MM

Product catalog summary
Product Overview:
The document provides technical specifications for monocrystalline solar cells with dimensions of 125mm x 125mm. These cells have an efficiency of up to 19.40% and are designed for optimal performance under standard test conditions (STC) of 100W/m², 25°C, and AM 1.5.
Mechanical Specifications:
The solar cells have a diagonal measurement of 165mm and an average silicon thickness of 180um ± 20um. The cells feature a back surface field made of aluminum.
Electrical Characteristics:
The cells are equipped with 1.5mm silver bus bars and a blue anti-reflective coating made of silicon nitride. They also have 2.8mm wide silver soldering pads. The efficiency of the cells ranges from 18.00% to 19.40%, with corresponding nominal power at maximum power point (MPP) ranging from 2.790W to 3.000W. The short circuit current (ISC) varies from 5.288A to 5.604A, and the open circuit voltage (VOC) ranges from 0.629V to 0.639V. The maximum power voltage (VPM) and maximum power current (IPM) are also detailed for various efficiency levels.
See more

Catalog excerpts

Mono 125MM-1

MONOCRYSTALLINE CELLS, 125 X 125 MM, EFFICIENCY UP TO 19.40% • Up to 19.40% efficiency one of the highest performing mono crystalline cells on the market • Two bus bars for maximum stringer compatibility • Blue anti-reflecting coating allows more sunlight be captured and converted to electricity. • Finer, closer fingers improves charge collection while minimizing shading • Better performance in low light conditions for improved energy yield • Lower light-induced degradation leads to greater power output over the entire module lifetime • All solar cells are tightly classified to optimize output of module • Maximum yied and longevity due to hotspot prevetion • Premium appearance results in a highly uniform and aesthetically appealing module

 Open the catalog to page 1
Mono 125MM-2

Mono 125MM MONOCRYSTALLINE CELLS, 125 X 125 MM, EFFICIENCY UP TO 19.40% MECHANICAL SPECIFICATION TECHNICAL DRAWING Monocrystalline solar cell 1.5mm bus bars(silver), blue anti-reflecting coating(silicon nitride) 2.8mm wide soldering pads(silver), back surface field(aluminum) ELECTRICAL CHARACTERISTICS Test condition: STC 100W/ Efficiency [%] Nominal Power Open Circuit Voltage VOC [V] Short Circuit Current ISC [A]

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.