Luxor LEATHER Luxor Black Luxor Fango Luxor Fango Light Luxor Navy Blue Luxor Grey Luxor Mouse Luxor Cognac Luxor Beige LEATHER DESCRIPTION Properties and finish: Luxor is drummed in a barrel with high quality aniline dyes. The vacuum drying process creates a structure that is stable so that any excessive stretching during use is prevented. The skins are then processed into crust and a special wax is added to the dye to give the leather a tough appearance. After the nishen, the leather is turned around in a wooden barrel to age the grain. It is then ‘plated’ until a soft and shiny optic is created. Brushing out the added wax emphasizes the aniline and pure character of the leather. The leather does not have a finish which allows the natural appearance such as scratches, mosquito bites and small imperfections to be obscured. It is these irregularities that give this leather its tough and natural character. Maintenance: Aniline dyes make leather feel soft and warm. Due to its open structure, leather is sensitive to stains. Light scratches can be removed by hand or with a soft, fluffy cleaning cloth. Avoid direct sunlight on your furniture as much as possible and do not place your furniture near a heat source. Discolouration of leather is excluded from the guarantee. Avoid damage by sharp objects such as buckles, studs of jeans, heels, animal nails, etc. These damages are excluded from the guarantee. In the event of moisture spillage, we recommend gently dabbing the leather with an absorbent cloth and allowing it to dry. Do not rub. After drying, it is best to treat the leather with a special leather cleaner. Never use care products and/or polishes that are not specifically intended for this leather. In addition to these instructions, it is a good idea to apply a leather protector every 6 months, so that the leather receives a certain layer of protection. We recommend the following products: • Keralux® set S from LCK • Leather Care Kit Wax & Oil from