Introduction
The document describes the development of the BLISSSILVER loudspeakers, inspired by the harmonious sound of the Modigliani Quartet's instruments. The focus is on creating a pair of loudspeakers designed to work together for stereophonic listening, emphasizing the need for matching electric and mechanical performance.

Details of the Conception
Crossovers: Components are meticulously sorted and coupled to ensure identical technical characteristics. They are point-to-point wired, with careful attention to the direction of winding for capacitors. Silver interconnection wires of identical length are directly welded to components.
Driver Units: Paired to yield identical curves, woofers are affixed using axial binding and decoupled with a damping joint. A stainless steel, non-magnetic rod provides stability, eliminating micro-movements and enhancing transitory response.
Cabinetwork: The cabinet's interior is lined with visco-elastic damping material to channel vibratory energy into heat, preventing absorption but allowing controlled energy transformation.

Performance
The BLISSSILVER loudspeakers deliver tight sound integrity, high-speed signal transmission, and a coherent sound spectrum. They produce a rich tone and beautiful sound stage, free from technical artifacts common in less sophisticated systems.

Technical Description
- Type: Two-way
- Woofer: 7’’ composite cone made of paper/carbon compound with aquaplast core and anti-vortex phase plug
- Tweeter: 1.1’’ pure silk soft dome with double neodymium magnet system
- Loading Principle: 4 cavities optimized for controlled air movement
- Power Requirement: 30 to 120 watts
- Impedance: 4 ohms
- Sensitivity: 89 dB/W/M (2.83 volts)
- Frequency Range: 45 - 22,000 Hz
- Dimensions: L 8.8’’ x P 11’’ x H 17’’
- Weight: 10 Kg
- Connection: Mono-wiring
- Finish: Pearly anthracite gray or natural wild cherry veneer