Metallon DS
4Pages

Technical Data Sheet 11/15 Metallon DS Exterior and interior Base and Top Coat General Description Type of material: Water-based special coating for metal surfaces with and without micaceous iron ore effect. Thick coat metal protection paint for priming, intermediate and final coats on ferrous and non-ferrous metals, galvanized steel components and non-anodized aluminium. Excellent adhesion on ferrous and non-ferrous metals. Double acting corrosion protection through inclusion of special anticorrosive pigments and fillers. Scale-shaped fillers prevent fast diffusion and active pigments slow down the start of corrosion on metal surfaces. The thixotropy provides very high dry film thickness on vertical surfaces and on edges. This protective property creates a surface with more or less structure when used on larger surfaces, depending on the application process and conditions. As Metallon DS is equipped with block-resistant binders, windows and doors made of iron, wood and non-ferrous metals may also be coated. With micaceous iron ore: DB 701, DB 702 (ca. RAL 9007), DB 703, DB 704, RAL 9006 and weathered copper Without micaceous iron ore: white, RAL 9005, RAL 6005 Packaging sizes: Technical Data Binder base: acrylate polymer dispersion 1,100– 1,330 g/cm³ depending on shade Tinting colours: with lightfast Tint Concentrate to max 3 % Jansen Additive S max. 5 % for improved processing on larger surfaces and also at higher temperatures. Do not dilute Metallon DS with water as this would require 5 times more water, extremely reducing the dry layer and seriously impairing rust protection.

Sheet 2 of 4 Processing temperature: The ideal application temperature is between 15 °C and 25 °C. To avoid film damage, the minimum temperature at object must be above +7 °C. Temperatures, film thicknesses and weather conditions may considerably affect drying times. (23 °C 60 % rel. air humidity) dust-dry: after ca. 30 minutes touch-dry: after ca. 2 - 3 hours re-coatable: after 8 – 10 hours Final hardness is achieved after about 3 days! Spreading rate: Product Code: Description of processing technique Substrate preparation: All substrates must be clean, dry and free of rust, grease and...

Sheet 3 of 4 Final coating: In order to achieve an surface which is easy to clean and robust, Metallon DS can be recoated with Jansen Metallon Finishing Paint. brush: use brush with mixed bristles. roller: use roller with short-pile mohair roller. spray: dilute with max. 5 % Additive S. Type XVLP XVLP Aircoat Airless Airless Pistol filter: Type Easymax WP II Easymax WP II * Aircoat Aircoat * Airless Airless * Air Pistol pressure identifica (-quantity) Nozzle tion 100% S.4.1 yellow 100% S.4.1 red 2 bar 411 /// /// 410 /// /// 410 /// Material Additive pressure (supply quantity) 10 Air...

Sheet 4 of 4 Cleansing of tools: as quickly as possible with water. Intermediate cleansing after longer use and during breaks. Do not allow paint to dry. For cleaning of dried material, Jansen SR-Plus is best suitable (cleaning agent from an aerosol can). cool, dry and frost-free. Opened packaging close well and briefly turn upside down. EU threshold value for this product (Cat. A/i): 140 g/l VOC (2010). This product contains max. 140 g/l VOC. Identification marking: Please observe our latest safety data sheet in internet under www.jansen.de The technical information was compiled in...