Fine Filer Rapid

Product catalog summary

General Description
Feinspachtel Rapid is a dispersion bulk filler that is solvent-free and designed for fast-drying repairs. It offers good build, rust inhibition, low pollutant levels, and is crack-free up to approximately 1000 microns wet-film thickness. It provides high coverage and can be applied multiple times in quick succession, with easy sanding.

Range of Uses
This product is suitable for filling on primed wood (interior), plaster, concrete, and primed iron (both exterior and interior). It is ideal for small surface repairs, while larger surfaces should use Jansen Ahrweilit Filler.

Technical Data

Binder Base: Acrylate dispersion
Pigment Base: Titanium dioxide
Density: Approximately 1.910 g/cm³
Field of Application: Suitable for both exterior and interior use. For exterior applications, it should be recoated promptly after drying to prevent flaking due to wood swelling and shrinkage.
Consistency: Paste-like
Processing Temperature: Above +5 °C for both object and circulating air
Drying Time: 1-2 hours at 23 °C and 60% relative humidity, varying with humidity and temperature changes

Re-coatability
Compatible with acrylic, synthetic resin, and dispersion paints.

Processing Technique

Application Method: Use a rust-proof spatula knife
Substrate Preparation: Ensure substrates are dry, clean, and free of separating substances. Apply a priming coat to porous and absorbent substrates. Specific instructions are provided for rough wood, iron, old plaster surfaces, new plaster, and intact old coatings.
Application: Can be applied wet-on-wet multiple times
Tool Cleaning: Use water and soap immediately after use
Storage: Store in a dry, cool, and frost-free environment. Ensure opened packaging is sealed well.

Additional Information
The product is not subject to any VOC category. Users should refer to the latest safety data sheet available online. The technical information provided is based on the latest state of the art, but users must verify the product's suitability for their specific application. The document also references the "General Terms and Conditions of Delivery and Payment in the Paint Industry."

Catalog excerpts

Technical Data Sheet 09/15 Feinspachtel Rapid -Fine Filer RapidDispersion filler, solvent-free General Description Type of material: Dispersion bulk filler Very fast-drying repair filler, good build, rust-inhibiting, low pollutants, free from cracks to ca. 1000 my wet-film thickness. High coverage. Fine Filler Rapid may be superimposed several times within a short period and is easy to sand. . Filling on primed wood (interior), plaster, concrete and primed iron (exterior and interior). As bulk filler and spot filler for small surfaces (for larger surfaces we recommend Jansen Ahrweilit Filler). Packaging sizes: 400 g and 1,3 kg/net tubes 600 g cartouche Technical Data Binder base: acrylate dispersion Pigment base: titanium dioxide Exterior and interior. For exterior use, Fine Filler Rapid should promptly be re-coated after drying. During filling on wood outdoors, swelling and shrinkage of the wood can generally lead to flaking. For further information see data sheet no. 18 of the German Federal Committee for Paints and the Protection of Objects, Frankfurt (Bundesausschuss Farbe und Sachwertschutz, Frankfurt). Processing temperature: for object and circulating air above + 5 °C (23 °C 60 % rel. air humidity) 1 - 2 hours depending on layer thickness. The values can fluctuate considerably in cases of higher air humidity resp. lower temperatures.

Open the catalog to page 1

with acrylic and synthetic resin paints as well as with dispersion paints. Product Code: Description of processing technique Methods of application: with every rust-proof spatula knife Substrate preparation: The substrate must be portative, dry, clean and free of separating substances (oil, grease, wax). Apply a priming coat to porous and absorbent substrates beforehand. Rough wood: indoors, depending on the absorbency of the substrate, to receive a priming coat of Acrylic Primer or Jansen Synthetic Resin Primer. A priming coat must definitely be applied to fibre boards. Iron: to receive an anti-rust...

Open the catalog to page 2