*myarchiexpo

Catalogs
JANSEN
catalogue Jansen-Economy 50 doors

catalogue Jansen-Economy 50 doors

Product catalog summary

System Overview: The Jansen-Economy 50 system is designed for elegant door constructions, suitable for single and double-leaf doors, as well as fixed lights. It features a 50 mm section depth with a rebate running all around for an attractive appearance. Door leaves have a double rebate seal, and the sill can be equipped with various seals. A full range of fittings is available, and the appearance is similar to Janisol doors.

Stainless Steel Profiles: These profiles use the same technology and dimensions as the standard range, allowing easy combination of steel types. Material 1.4307 is suitable for non-aggressive environments, while 1.4404 is resistant to chlorine and salt, ideal for industrial and coastal areas.

Authorisations and Tests: The system meets standards for watertightness, wind load resistance, air permeability, thermal transmission, sound insulation, bullet proofing, and strength requirements. It also satisfies load-bearing capacity requirements for safety devices.

Types Overview: The system includes various door configurations with recommendations for maximum door sizes: a leaf width of 1200 mm and a height of 2500 mm.

Profile Summary: Detailed specifications for profiles include weight, cross-sectional area, and moments of inertia. Profiles are available in different finishes, including blank, galvanized, and stainless steel.

Specifications:
1. Glazing Weatherstrips: Made from EPDM, available in various joint widths. Each type is specified for different applications.
2. Narrow Joint Sealant: Transparent, universal use, with a toxicity class of 4.
3. Packing Tape: Made from closed cell polyethylene, available in various sizes.

Procedures:
1. Application Instructions: Specific pages are referenced for detailed procedures.
2. Glazing Tables: Provided for dry and wet glazing methods.

Standards and Recommendations:
1. Dry Glazing: Recommendations to test inner glazing seals.
2. Glazing with Sealing: Emphasis on testing packing tapes.
3. Joint Dimensioning: Refer to glass manufacturer guidelines.

Key Data from Tables:
1. Glazing Tables: Indicate the use of specific weatherstrips and packing tapes.
2. Fittings Summary: Lists lock functions and fitting positions.

Overview: This document provides technical specifications and installation instructions for locks and fittings used in Jansen-Economy 50 doors, focusing on panic and emergency functions.

Specifications: Outlines different lock types, including latch and bolt locks, roller latch locks, and panic locks, with dimensions and materials.

Installation Procedures: Instructions for each lock type, specifying necessary components and additional items.

Standards and Recommendations: Highlights compliance with EN 179 standards and provides warnings against improper use.

Key Components and Accessories: Lists components and accessories necessary for specific configurations and emergency functions.

Warnings and Best Practices: Important warnings to ensure safety and proper operation.

Product Specifications:

Drill Guide: Optimizes guidance of twist drill for precise drilling.
Screwdriver Blades: SR1 head for battery-operated screwdrivers.
Torx Blades: Compatible with specific models.
Countersinks: For aluminium screw-on hinges.
Drilling Template: For aluminium screw-on hinges.
Assembly Lever: For straightening fixing springs.

Jansen-Economy 50 Doors:

Includes detailed section drawings highlighting thermal performance.
Maximum opening width of 100° must be limited by a door stopper.

Application Examples:

Various configurations and assembly examples.
Recommendations for surface treatment.

Materials and Construction:

Details on steel and stainless steel components.
Instructions for fabricators on creating specific components.

Overview: Provides technical specifications and installation instructions for the Jansen-Economy 50 doors, focusing on fittings and multipoint locks.

Specifications: Outlines dimensions and part numbers for components used in the doors.

Installation Procedures: Step-by-step instructions for installation of fittings.

Standards and Recommendations: Mentions compliance with standards and provides installation recommendations.

Key Components and Functions: Details on strike plates, automatic openers, and rebate lever bolts.

Diagrams and Measurements: Includes diagrams with measurements for installation.

Conclusion: Serves as a comprehensive guide for the installation of door fittings, providing essential specifications and procedures.

Specifications:
Installation instructions for fittings on Jansen-Economy 50 doors, applicable to both single and double leaf doors.

Procedures:
Outlines installation of various door fittings, including handles and panic bars.

Standards and Recommendations:
Emphasizes using the door closer as a jig for installation.

Key Data from Diagrams:
Provides detailed measurements for installation.

Limitations:
Notes on suitability for certain types of external doors.

Best Practices:
Recommendations for using the door closer as a template during installation.

Overview: Provides technical specifications and installation instructions for the GEZE Boxer integrated door closer.

Specifications:

Model: GEZE Boxer 555.671 (Size 2-4)
Door Type: Single and double leaf doors
Leaf Width: Minimum 640 mm, Maximum 1070 mm
Leaf Weight: Maximum 130 kg
Door Opening Angle: Approximately 120°
External Door Suitability: Limited use for external doors

Installation Instructions:

Mounting: Use the door closer as a jig for installation.
Distance Profile and Mounting Bracket: Proper alignment is crucial.
Automatic Drop Seal: Install on the side opposite the hinges.

Recommendations:

Use a door stopper to prevent excessive opening.
Replace screws in emergency doors with blind rivets.

Diagrams and Measurements: Includes diagrams with measurements for components.

Notes: Emphasizes the importance of using correct tools and measurements.

Specifications and Procedures:
1. Glazing Weatherstrip Installation: Attach weatherstrip and seal mitre corners.
2. Dry Glazing Installation: Install infill elements using dry glazing techniques.

Standards and Performance Characteristics:
1. Performance According to EN 14351-1: Outlines performance characteristics.
2. Uf Values: Based on internal calculations and test certificates.

Recommendations:
1. Testing and Verification: Verify choice of weatherstrips on an infill panel.
2. Adherence to Appraisal Reports: Adhere to provisions of appraisal report for maximum performance.

Key Data from Tables and Charts:
1. Joint Widths: Specifies joint widths for different weatherstrips.
2. Fastening Stud Distances: Maximum distances for fastening studs.
3. Uf Values: Provided for infill elements greater than 24 mm.

Performance Specifications:
Outlines performance characteristics of doors according to EN 14351-1 standards.

Dimensional Variations:
Size changes noted under various standards.

Sound Insulation Calculation Example:
Provides a detailed example of calculating sound insulation properties.

Additional Details:
Includes references to performance characteristics and sound insulation properties.

Catalog excerpts

Jansen-Economy 50 Türen Türen und Festverglasungen in Stahl und Edelstahl Jansen-Economy 50 portes Portes et vitrages fixes en acier et acier Inox Jansen-Economy 50 doors Doors and fixed lights in steel and stainless steel

Open the catalog to page 1

Inhaltsverzeichnis Sommaire Content Jansen-Economy 50 Türen Jansen-Economy 50 portes Jansen-Economy 50 doors Systembeschrieb Zulassungen Typenübersicht Description du système Homologations Sommaire des types System description Authorisations Summary of types Profilsortiment in Stahl und Edelstahl Assortiment de profilé en acier et acier Inox Range of profiles in steel and stainless steel Profilübersicht Profile im Massstab 1:1 Glasleistenübersicht Sommaire des profilés Profilés à l’échelle 1:1 Sommaire des parcloses Summary of profiles Profiles on scale 1:1 Summary of glazing beads Zubehör Beschläge...

Open the catalog to page 3

Systembeschrieb Description du système System description Jansen-Economy 50 Türen Jansen-Economy 50 portes Jansen-Economy 50 doors Jansen-Economy 50, das Profilsystem für elegante, flächenbündige Türkonstruktionen Jansen-Economy 50, le système de profilés pour constructions élégantes de portes à fleur Diese Profilserie (Bautiefe 50 mm) eignet sich für ein- und zweiflüglige Türen sowie für Festverglasungen. Ce système de profilés (hauteur de construction 50 mm) convient aux portes à un ou deux vantaux, ainsi qu'aux vitrages fixes. Ausser der Flächenbündigkeit besticht diese Türkonstruktion auch...

Open the catalog to page 4

Systembeschrieb Description du système System description Jansen-Economy 50 Türen Jansen-Economy 50 portes Jansen-Economy 50 doors Jansen-Economy 50 Edelstahl – das Profilsystem für flächenbündige Türkonstruktionen Jansen-Economy 50 acier Inox – le système de profilés pour constructions de portes à fleur Die Edelstahlprofile basieren auf der bewährten Jansen-EconomyTechnologie. Profilform und -Dimensionen sind identisch mit dem Jansen-Economy-Programm. Dies ermöglicht dem Planer die problemlose Kombination beider Stahlqualitäten und dem Verarbeiter den Einsatz identischer Zubehörteile und Verarbeitungshilfen....

Open the catalog to page 5

Ausgefuhrte Objekte Jansen-Economy 50 Turen Objets realises Jansen-Economy 50 portes Completed projects Jansen-Economy 50 doors Vredespaleis, Den Haag/NL (Architekt: Michael Wilford, Stuttgart/DE)

Open the catalog to page 6

Zulassungen/Prüfungen Homologations/Essais Authorisations/Tests Jansen-Economy 50 Türen Jansen-Economy 50 portes Jansen-Economy 50 doors Prüfungen Essais Tests Werte Valeurs Values Schlagregendichtheit Etanchéité à la pluie battante Watertightness Widerstand bei Windlast Résistance à la pression du vent Resistance to wind load Luftdurchlässigkeit Perméabilité à l'air Air permeability Wärmedurchgangskoeffizient Transmission thermique Thermal production Schallschutz Isolation phonique Sound insulation Durchschusshemmung Résistance aux balles Bullet proofing Klassifizierung der Festigkeitsanforderungen...

Open the catalog to page 7

Typenubersicht Jansen-Economy 50 Turen Sommaire des types Jansen-Economy 50 portes Summary of types Jansen-Economy 50 doors Einfliigelige Tiire Einfliigelige Tiire mit Riegel Einfliigelige Tiire mit Seitenteil Porte a un vantail Porte a un vantail avec traverse Porte a un vantail avec partie laterale Single leaf door Single leaf door with transom Single leaf door with side light Einfliigelige Tiire mit Oberlicht Einfliigelige Tiire mit Seitenteil und Oberlicht Zweifliigelige Tiire Porte a un vantail avec imposte Porte a un vantail avec avec partie laterale et Porte a deux vantaux Single leaf...

Open the catalog to page 8

Typenübersicht Sommaire des types Summary of types Jansen-Economy 50 Türen Jansen-Economy 50 portes Jansen-Economy 50 doors Verblechte Türe mit Seitenteil und Oberlicht Porte tôlée à un vantail avec avec partie latérale et imposte Sheet metal single leaf door with side light and top light Verblechte zweiflügelige Türe mit zwei Seitenteilen und Oberlichtern Porte tôlée à deux vantaux avec deux parties latérales et impostes Sheet metal double leaf door with two side lights and top lights Festverglasung Vitrage fixe Fixed glazing Einflügelige Türe mit Rundbogen-Oberlicht Porte à un vantail avec...

Open the catalog to page 9

Profilubersicht Jansen-Economy 50 Turen Sommaire des profiles Jansen-Economy 50 portes Summary of profiles Jansen-Economy 50 doors * Gewichte fur die Edelstahl-Profile siehe Seite 41-11 * Poids pour profiles en acier Inox voir page 41-11 * Weights for stainless steel profiles see page 41-11

Open the catalog to page 10

Profilübersicht Sommaire des profilés Summary of profiles Jansen-Economy 50 Türen Jansen-Economy 50 portes Jansen-Economy 50 doors * Poids pour profilés en acier Inox voir page 41-11 * Gewichte für die Edelstahl-Profile siehe Seite 41-11 Oberfläche * Weights for stainless steel profiles see page 41-11 ohne Zusatz = blank sans supplément = brut without addition = bright = en bandes d’acier zinguées au feu = made from hot-dip galvanised strip mit GV+GC = aussen galvanisch verzinkt und gelbchromatiert avec GV+GC = zingués galvanique à l’extérieur et chromatisé jaune with GV+GC = outside galvanised...

Open the catalog to page 11

Profilubersicht Jansen-Economy 50 Turen Sommaire des profiles Jansen-Economy 50 portes Summary of profiles Jansen-Economy 50 doors ohne Zusatz aussen galvanisch sans supplement avec GV+GC zingues galvanique chromatise jaune Acier Inox, Acier Inox, without addition with GV+GC made from hot-dip galvanised strip outside galvanised Stainless steel, Stainless steel,

Open the catalog to page 12

Profilübersicht Sommaire des profilés Summary of profiles Jansen-Economy 50 Türen Jansen-Economy 50 portes Jansen-Economy 50 doors Stabachse Axe de la barre Bar axis Poids pour profilés en acier Inox Weights for stainless steel profiles .01 = Werkstoff 1.4404 (AISI 316L) .05 = Werkstoff 1.4307 (AISI 304L) .01 = matériau 1.4404 (AISI 316L) .05 = matériau 1.4307 (AISI 304L) .01 = material 1.4404 (AISI 316L) .05 = material 1.4307 (AISI 304L) * Länge ca. 5 – 5,5 m * Longueur env. 5 – 5,5 m * Length approx. 5 – 5.5 m

Open the catalog to page 13

All JANSEN catalogs and technical brochures

Archived catalogs

JANSEN 01/2007
64 Pages