Ahrweissal Synthetic Resin Filler

Product catalog summary

General Description
The Ahrweissal Synthetic Resin Filler is a solvent-containing surface filler suitable for both exterior and interior use. It is designed for filling on wood (interior), metal, and old plaster. However, for outdoor wood applications, swelling and shrinkage may cause flaking. The filler is easy to process, has a high spreading rate, and dries well even in humid conditions. It is available in white and comes in various packaging sizes.

Technical Data
The filler is based on a synthetic resin combination with titanium dioxide and special fillers. It has a density of approximately 1.840 g/cm³ and should be processed at temperatures between +5 °C and +30 °C. It is re-coatable after drying overnight and can be used with dispersion paints, acrylic resin paints, and alkyd resin enamels.

Processing Technique
Substrates must be dry, clean, and free of substances like oil or wax. Rough wood should be primed, and old coatings should be sanded or removed. Iron and steel require a primer. The filler can be applied multiple times a day, and tools should be cleaned with a turpentine substitute. It should be stored in a cool, dry, frost-free environment.

Additional Information
The product is not subject to any VOC category. Users should refer to the latest safety data sheet available online. The technical information provided is based on the latest standards, but users must ensure the product's suitability for their specific needs.

Catalog excerpts

Ahrweissal-Kunstharzspachtel - Ahrweissal Synthetic Resin FillerExterior and interior Solvent-containing surface filler General Description Type of material: synthetic resin filler Filling on wood (interior), metal and old plaster. For filling on wood outdoors, swelling and shrinkage of the wood can generally lead to flaking. For further information see data sheet no. 18 of the German Federal Committee for Paints and the Protection of Objects, Frankfurt (Bundesausschusses Farbe und Sachwertschutz, Frankfurt). Particularly easy processing and high spreading rate both on large and small surfaces.. Good drying properties, even with higher air humidity and at lower temperatures through-hardening overnight with normal film thickness. Wet-film thickness max. 700 my. With thicker layers, we recommend Jansen Fine Filler Rapid or Jansen Ahrweitex Fast-drying Filler. Ahrweissal Synthetic Resin Filler distinguishes itself particularly with the white shade as well as highest build and covering power. Evenly processed surfaces can be coated without undercoat, without the quality of the surface being spoilt. Packaging sizes: Technical Data Binder base: synthetic resin combination Pigment base: titanium dioxide and special fillers Processing temperature: (23 °C 60 % rel. air humidity) re-coatable after drying overnight, several surface treatments per day are possible including wet on wet

Open the catalog to page 1

with dispersion paints, acrylic resin paints and alkyd resin enamels. Product Code: Description of processing technique Substrate preparation: The substrate must be portative, dry and free of separating substances (oil, grease, wax). Rough wood if necessary prime with Jansen Woodprimer exterior or Jansen Synthetic Resin Undercoat Paint (interior). Intact old coatings slightly sand. Damaged old coatings to be completely removed. Iron and steel plate prime with Jansen Rust Primer or Jansen Universal Primer. The preparation of the substrate and painting must be scientifically and technically state...

Open the catalog to page 2