Catalog excerpts
* Brevet International Water-repellent full-grain leather upper. SYNERGY Vibram® sole with Infinergy® de BASF Aluminum safety toe cap type B and midsole no metallic Antistatic ❖ Rangers safety shoe made with anti-fatigue technology. ❖ Water-repellent full grain leather upper with pull-up finish, made with a minimum of stitching for longer life. PU defenders for greater toe protection and long life in harsh conditions. ❖ Fluorescent markings on sides for increased visibility by night. ❖ Two leather tabs, one on the tongue and the other on the back. ❖ Upper lined in breathable 3D mesh with honeycomb structure to improve the peripheral ventilation of the foot, dries out rapidly. Ergonomic padded collar with compact flexible foam for extra comfort. BOA® Fit System with no lacing. Dial in to fast, effortless, precision fit. Padded and lined leather tongue for instep protection with side bellows to keep out dust and dirt. Heel stiffener to reinforce the heel seat. Soft footbed made of BASF Dynamic polyurethane with heat sensitive memory foam and acts over the entire surface of the foot, cushions pressure points, improves weight distribution and shock absorption caused by impact with the ground. Anatomical, breathable. Anatomical, breathable and fitted with the Link ESDTM system, innovative multi-contact static electricity dissipater (Patent pending). PREM-Alu tip in aluminium type B resisting an impact of an energy of 200 joules. Minimum height after test ≥ 4mm in relation to the Type A toe cap in accordance with Standard 22568-2 : 2021. Stab-resistant structural insole and liner in FleXtane By Jallatte, in compliance with standard 22568-4 : 2021, antistatic, 100% composite. Sewn directly onto the upper and covering 100% of the foot for total protection. 100% composite materials: lighter than steel, non-magnetic, non-conductive of heat or cold. ❖ Innovative Synergy sole in bi-ingredient CA /PU and BASF Infinergy® E-TPU (Expanded Thermoplastic PolyUrethane) insert, with a remarkable capacity to reproduce more than 55% of the energy accumulated while (Bounce test EN ISO 8307). Slip resistance tests results EN Standard ISO 20345:2011 Requirement SRC (SRA+SRB) SRA Test ground : ceramic / lubricant : water and detergent On flat 0,73 (>0,32) – On the heel 0,70 (>0,28) SRB Test ground steel / lubricant : glycerine On flat 0,30 (>0,18) – On the heel 0,28 (>0,13) Weight Size Packaging Box shoes (mm) Cartons (mm) Non contractual document Copyright JALLATTE Limited distribution Vibram® rubber outsole with specific studs for outdoor jobs. E-TPU insert at low density of 0,25. • High resistance to abrasion and stretching. • Good chemical resistance. • Long-term durability in a wide temperature range. • Dynamic performance in 3 phases: Shock Absorption - Accumulation of energy - Dynamic Return. Gross weight (42) : 2146 g / Net weight (42) : 1840 g 35 to 48 5 pairs 337 x 3
Open the catalog to page 1