NEW PRODUCTS WEBNET samples WEBNET perimeter type H29 AISI 316 material group Standard sleeves Order No. Short sleeves Order No. Mesh aperture Technical data subject to change

NEW PRODUCTS Sleeveless WEBNET samples WEBNET perimeter type H24 AISI 316 material group Mesh aperture Technical data subject to change

NEW PRODUCTS WEBNET display frames Round tube Ø 17,2 mm / Tube frame H × L: 400 × 600 mm / WEBNET perimeter type H30 AISI 316 material group Rope Standard sleeves Order No. Short sleeves Order No. Mesh aperture Technical data subject to change

NEW PRODUCTS Display frames with sleeveless WEBNET Round tube Ø 17,2 mm / Tube frame H × L: 400 × 600 mm / WEBNET perimeter type H30 AISI 316 material group R ope Mesh aperture Technical data subject to change

NEW PRODUCTS WEBNET micro, display frames INVISS-R and INVISS-C Slotted round or rectangular tubes / Tube frame H × L: max. 400 × 600 mm / WEBNET perimeter type H24 AISI 316 material group Rahmen Mesh aperture INVISS-R: No. 22255-2615-040 (Figure with standard sleeves) INVISS-C: No. 22255-2015-040 (Figure with standard sleeves) Webnet micro Standard sleeves Technical data subject to change

NEW PRODUCTS Sleeveless WEBNET Rope Ø 1.5 – 5 mm AISI 316 material group Mesh aperture Technical data subject to change

NEW PRODUCTS Sleeveless WEBNET Rope Ø 1.5 – 5 mm AISI 316 material group Mesh aperture Technical data subject to change

NEW PRODUCTS WEBNET with short sleeves Rope Ø 1.5 – 5 mm AISI 316 material group Mesh aperture Standard sleeve Technical data subject to change All rights reserved © 1988 / 2014 Jako

NEW PRODUCTS WEBNET micro display frames Round tube Ø 17,2 mm / Tube frame H × L: 400 × 600 mm / WEBNET perimeter type H30 AISI 316 material group Rope Mesh aperture Figure: Mesh aperture 40 mm Webnet micro Standard sleeves Technical data subject to change All rights reserved © 1988 / 2015 Jakob

NEW PRODUCTS WEBNET micro samples WEBNET perimeter type H29 AISI 316 material group Mesh aperture WEBNET micro Standard sleeves Technical data subject to change

NEW PRODUCTS WEBNET micro Rope construction 6 × 7 + WC, minimum breaking load 1.4 kN Swaged sleeve dimensions 5.5 × 6 × 2.8 mm AISI 316 material group Rope Mesh aperture Rope length Light transmission % Longitudinal node strength Transversal node strength (breaking load of swage) WEBNET micro Standard sleeves Technical data subject to change

NEW PRODUCTS Post fitting for external thread, for flat posts For M3– M6 AISI 316 material group Order No. Dimensions Pitch angle Dimensions Pitch angle

Rope Systems Post fitting for external thread, for flat posts AISI 316 material group Pitch angle For external mm mm Created: 19.02.2016 Amended: Technical data subject to change Copyright by Jakob AG Switze

Rope Systems Post fitting for external thread, for round posts 0 33 mm AISI 316 material group Pitch angle For external mm mm Created: 19.02.2016 Amended: Technical data subject to change Copyri

Rope Systems Post fitting for external thread, for round posts 0 42 m AISI 316 material group Pitch angle For external mm mm Created: 19.02.2016 Amended: Technical data subject to change Copyrigh

NEW PRODUCTS Internal thread end for on-site swaging For on-site assembly AISI 316 material group Order No. Right-hand thread Order No. Left-hand thread kN Working load limit CL: Konfektionslänge / Longueur de confection / Assembly length Assembly: The correct swaging technique, the compatibility with the rope diameter, and the number of swage points must be checked by the user. Functional integrity is assured only with Jakob jaws and Jakob rope Nos. 10820- and 10830-. Assembly instructions: www.jakob.com Caution: The rope insertion depth must be absolutely free of lubricants. Degrease with solvent...

NEW PRODUCTS Radius head end stop for on-site swaging For on-site assembly AISI 316 material group kN Working load limit CL: Konfektionslänge / Longueur de confection / Assembly length Assembly: The correct swaging technique, the compatibility with the rope diameter, and the number of swage points must be checked by the user. Functional integrity is assured only with Jakob jaws and Jakob rope Nos. 10820- and 10830-. Assembly instructions: www.jakob.com Caution: The rope insertion depth must be absolutely free of lubricants. Degrease with solvent (Loctite 7063. Jakob-No. 30879-0002). Not suitable...

NEW PRODUCTS Clevis for on-site swaging For on-site assembly AISI 316 material group kN Working load limit CL: Konfektionslänge / Longueur de confection / Assembly length Assembly: The correct swaging technique, the compatibility with the rope diameter, and the number of swage points must be checked by the user. Functional integrity is assured only with Jakob jaws and Jakob rope Nos. 10820- and 10830-. Assembly instructions: www.jakob.com Caution: The rope insertion depth must be absolutely free of lubricants. Degrease with solvent (Loctite 7063. Jakob-No. 30879-0002). Not suitable for stranded...

NEW PRODUCTS Wire rope net WEBNET micro Weight: 0,5 Kg/m / Rope length: 40 m/m / Number of sleeves: 360 per m Delivered as rolls with perimeter type H24 AISI 316 material group 2 Mesh aperture WEBNET micro Standard sleeves Technical data subject to change Copyright by Jakob AG Switzerlan